When Power Gear levelers won't retract but deploy normally, the issue is typically a faulty retract solenoid valve, damaged wiring, or control module failure. This comprehensive guide provides step-by-step troubleshooting to identify and fix the problem.
Reduce RV slide-out wear with proper usage, seal maintenance, and lubrication. Covers usage frequency questions and storage tips.
Step-by-step guide to removing Firefly multiplex control panels in RVs. Covers preparation, removal process, and reassembly tips.
The ignition relay on a 1988 Ford E350 (Fleetwood Tioga base) is typically located in the engine bay fuse/relay box on the driver's side firewall, or in a separate relay box near the battery. Some models may have it mounted on the firewall or inner fender well.
When your RV slide out motor runs but won't retract, it's typically a hydraulic system issue like low fluid, air in lines, or a faulty valve. Cable systems may have broken cables or stripped gears.
All headlights out with other lights working points to headlight relay or combination switch failure. Check and swap headlight relay first - if no change, the combination switch is likely failed. Common issue on late 90s Ford chassis.
Motor should run in Store mode for HWH jacks. If jacks extend but not retract, likely the retract solenoid valve or its wiring. Spring replacement should not affect hydraulic function unless lines were disturbed. Contact HWH for technical support.
Your unprogrammed Ford F53 transponder keys will continue working indefinitely, but they lack anti-theft security features. Programming adds immobilizer protection but isn't required for basic operation.
Speed-dependent squeal from front driver side is likely brake caliper drag or wheel bearing. After driving until noise appears, feel wheel hub for heat - hot hub indicates caliper drag. Jack up and check for wheel bearing play. Compare to passenger side.
The electrical manual for your 2007 Dyna Max IE250's Dyna Air Ride suspension is typically found through Monaco Coach Group archives or specialty RV parts dealers, as this was a premium system installed on select Dyna models.
When your RV propane furnace clicks but won't light, it's usually caused by a dirty or failing igniter, blocked air intake, low propane pressure, or faulty control board. Most issues can be resolved by cleaning the igniter, checking propane supply, and ensuring proper airflow.
When your Everchill 12V refrigerator's freezer works but the fridge compartment doesn't cool, it's typically caused by a faulty damper control, blocked air circulation, or temperature sensor issue. Start by checking the damper door between compartments and verifying proper airflow.
When your Dometic RV fridge ignites perfectly on AUTO but fails when manually switched to gas mode, the issue is typically a faulty ignition control module or loose wiring connections. The control board may be sending conflicting signals between manual and automatic operation modes.
A check engine light on your 2022 Ford E450 after recent service likely indicates an emissions system issue. Get an OBD2 scanner to read the exact code first, then check for loose connections, damaged vacuum lines, or a loose gas cap before returning to the dealer.
Slide toppers cause problems when misaligned, with incorrect spring tension, or when fabric bunches during operation. When having toppers replaced, ensure installer tests slide operation multiple times and adjusts tension for smooth operation.