Results for "regulations"

General Medium 1-2 days for initial setup 220 👍 1

RV Storage on Gravel: Preventing Weed and Moisture Issues

Nobody warned me that buying a house with RV storage meant inheriting the previous owner's 13-year-old weedy, muddy gravel disaster. While considering this location's storage options, I want to mitigate potential issues with weed growth and moisture retention under the RV.

I'm seeking advice on effective strategies for storing on a gravel surface that shows significant weed penetration and moisture retention. Initial ideas include pre-treatment herbicide application and installing a protective barrier, but I want input from experienced RV owners.

My primary concerns are preventing undercarriage damage and managing moisture/vegetation growth. I plan to spray weed killer beforehand and potentially lay down a weed barrier, pending facility approval. What techniques or materials do you recommend to protect my RV during storage? …more

Read answer

Engine Hard 2-3 hours for diagnosis 172 👍 0

1999 F53 V10 Oil in Coolant: Complete Head Gasket Diagnosis & Repair Guide

Called three dealerships about warranty coverage for oil contamination in my 1999 Ford F53 V10's coolant system — before I tackle this head gasket nightmare myself. The unit overheated after the oil level dropped significantly, though it still starts and runs without throwing any codes.

Based on the symptoms, I suspect a blown head gasket, but I want to perform proper diagnostic testing before committing to a major repair. What specific diagnostic procedures should I run to confirm whether this is actually a head gasket failure versus other potential causes like a cracked head or block issue?

Looking for a systematic approach to pinpoint the exact problem before I start tearing into this engine. …more

Read answer

Chassis Medium Varies 148 👍 1

RV Flat Tire on Highway: Emergency Steps & Specialized Roadside Service Tips

Every highway mile seems to be eating through my Tiffin Allegro motorhome tires way faster than it should, especially after that brutal double blowout on the back axle. When this happened to us, we found that regular AAA and typical roadside assistance don't always help with RVs. We were stranded and eventually had to use a service called Driving Solutions, who charged us $1600 for used tires after eight hours of waiting.

What's the proper procedure if this happens? Should I try to move to a safer location first, or stop immediately? Who should I call for help - are there specialized services that handle RV tires? I want to be prepared with the right contacts and know the safe steps to take, because I imagine regular tow trucks and tire services might not have the equipment or expertise to handle a large motorhome tire emergency on the interstate. …more

Read answer

Product Ranking 8 compared

Best RV Water Heaters

4.4 (6,800 reviews)

Engine Hard 4-6 hours 119 👍 0

How to Replace Obsolete F53 Chassis ABS Control Module - Ford Discontinued Repairs Guide

Last week my 2013 Coachman Encounter's F53 chassis started throwing ABS codes — can't afford the $3,000+ dealer quote so is there a DIY fix under $500? Our ABS control module failed, creating a no brakes issue. After being towed to a Ford Dealership on May 28th, the repair has been incredibly complex. They've received incorrect and damaged modules, and even after claiming to fix it, the ABS warning light remains on and reprogramming attempts have failed.

Ford apparently no longer makes this module for units over 10 years old. What alternatives exist for finding a compatible ABS control module for my older F53 chassis when OEM replacement isn't available? …more

Read answer

Solar Batteries Medium 2-4 hours 113 👍 0

How to Upgrade Your RV Converter Charger for Lithium Batteries with Gentle Care

Halfway through planning our three-week cross-country trip next month, I realized my PD4560 60-amp converter/charger won't properly handle the lithium batteries I'm installing. My existing Progressive Dynamics unit obviously isn't designed for LiFePO4 batteries - I can use boost mode to charge them up, but I know that's not ideal for battery longevity.

I just purchased a 30 amp generator and I'm wondering if it will have enough capacity to handle not just my current charger, but potentially a larger lithium-compatible unit. I'm considering upgrading to a 75 or even 90 amp charger to reduce charging times, but I need to make sure my generator can handle the load. I'm trying to figure out the actual AC amp draw of these higher-capacity chargers and whether my 30 amp generator will be sufficient.

What are the best lithium-compatible converter/charger options that would work with my generator setup, and how do I properly size the charger capacity to match my lithium battery bank? …more

Read answer

Electrical Medium 45 minutes 113 👍 0

RV Shore Power Not Working: Complete Troubleshooting Guide

Plugged into shore power at the campground last night and absolutely nothing happened — no lights, no AC, nothing. Breaker on the pedestal looks fine and my neighbor's rig is running perfectly on the same circuit. Starting to wonder if something fried inside the transfer switch. …more

Read answer

Engine Easy 15 minutes 105 👍 0

5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide

Planning to tune my 2018 Ford 6.8L V10 RV but got quoted $800 for professional tuning and wondering if the 5 Star X4 is DIY-friendly. Specifically want to know about real-world performance improvements - does it actually improve throttle response and shift points? What about fuel economy gains?

Which of the 3 programs works best for RV towing? Is the investment worth it for better drivability or just hype? …more

Read answer

General Easy 30 minutes to 1 hour 95 👍 1

Flag Pole Mount for Tiffin Allegro 33AA Without Fixed Ladder

Spent all morning staring at my new Tiffin Allegro 33AA trying to figure out how to mount a telescopic flag pole without destroying something. My previous RV had a fixed ladder which made mounting easy and secure, but this new rig doesn't have that option.

I'm concerned about using suction cups or zip ties because they don't seem very secure, and I'm afraid the telescopic flag pole could come loose while driving and cause damage or become a road hazard. The bike rack is already occupied with our bikes, so that's not available either.

What are some safe, secure mounting options that won't damage the RV's exterior? I need something that will hold firmly during highway speeds but won't leave permanent marks or holes in my new rig. …more

Read answer

Engine Medium 1-3 hours 87 👍 0

How to Fix Onan QD3200 Diesel Generator Fuel Leak Behind Air Filter

According to Murphy's Law, my Onan QD3200 generator is doing something bizarre — it's leaking diesel fuel from behind the air filter instead of where you'd normally expect fuel leaks. The fuel appears to be coming from somewhere behind the air filter box, and I'm worried about making things worse if I don't diagnose this properly. I've shut everything down for now because I'm nervous about safety issues.

I need to know the safest way to trace where this leak is actually coming from without creating a fire hazard or damaging anything. What are the most likely culprits in that area, and what's the proper procedure to identify the exact source? I want to make sure I approach this methodically rather than just poking around and potentially making the problem worse. …more

Read answer

Plumbing Medium 30 min 86 👍 0

RV Sewer Hose Freezing Temperature & Cold Weather Protection

Nobody can seem to agree on whether I should winterize my RV sewer hose system now or wait until temperatures actually threaten my specific setup. Current setup involves a dual-hose configuration with approximately 30 feet total length running to septic connection point.

Critical issue: The final two feet of hose rises approximately two inches above the main run elevation before connecting to the septic inlet. This creates a low point where effluent can accumulate rather than draining completely. Overnight temperatures are forecast to drop to 25°F for the next 48 hours.

What is the precise freezing temperature for RV sewer hoses, and does the uphill section with potential standing water create additional freeze risk at this temperature threshold? …more

Read answer

Engine Medium 2-3 hours 85 👍 0

Ford F53 460 EGR Valve Cleaning Guide - Fix Motorhome Stalling Issues Now

Despite probably being a dumb question, why does my 1997 Ford F53 with the 460ci keep being such a real pain lately? Keeps stalling out when I'm sitting at lights or just idling around. This happens every 400-600 miles like clockwork - runs great for a while, then boom, stalling starts up again.

I'm pretty sure it's the EGR valve getting all carboned up because I've seen this pattern before. The thing is, I'm getting tired of dealing with this over and over. Should I just clean the EGR valve again, or is there a better long-term fix? I've heard people talk about EGR deletes but not sure if that's the way to go with the ECU and all that. …more

Read answer

Product Ranking 8 compared

Best RV Refrigerators

4.3 (9,200 reviews)

Ac Refrigeration Easy 15 minutes 85 👍 0

RV House Refrigerator Storage: Should You Leave the Door Open?

According to the moisture buildup around my residential fridge door seals after just two weeks of storage, I'm clearly doing something wrong.

With my old propane fridge, I religiously propped that door open during storage like every RV manual commanded. But now that I've got this "house fridge" - do I treat it like a regular home refrigerator and keep it closed, or do I stick with my old RV habits and prop it open? I'm probably overthinking this, but the last thing I want is to open it up next season and get knocked over by some horrific smell that could wake the dead. What's the right move here for preventing mold and keeping things fresh during long-term storage? …more

Read answer

Engine Hard Professional installation 82 👍 0

How to Convert Propane RV Generator to Diesel: Complete Fuel System Guide for Safe Installation

Before our two-week cross-country RV trip next month, I need to figure out this propane-to-diesel generator conversion because I'm getting conflicting advice and hearing horror stories about fuel starvation. My biggest concern is that if I just tap into the main fuel line with a simple tee fitting, I might end up starving either the engine or the generator when they're both running.

I'm worried I could damage something expensive or even create a dangerous situation. What are the proper ways to set up the fuel delivery system for a diesel generator conversion? I definitely don't want to just wing this - I need to know the safe, correct methods before I attempt anything. Should I be looking at a completely separate fuel system or are there ways to safely share the main tank? …more

Read answer

Ac Refrigeration Easy 30 minutes 82 👍 0

Dometic CF80 Drain Foam Replacement: Complete Step-by-Step Guide

Woke up to check out my new place's Dometic CF80 basement refrigerator/freezer and discovered what looks like deteriorated foam filter stuff in the bottom drain compartment. The foam material shows significant contamination and degradation.

I need to understand the specific function of this foam component within the CF80's drainage system. Is this foam element critical for proper unit operation, and what are the consequences of operating without it? Additionally, what is the recommended replacement schedule for this component, and how do I determine when replacement is necessary versus simple cleaning? …more

Read answer

Engine Hard Professional diagnosis required 81 👍 0

Ford E450 Godzilla Engine Water Pump Timing Cover Surface Repair Guide: Diagnosis & Fix

During my 2 AM breakdown, my Ford E450's Godzilla engine started hemorrhaging coolant from the water pump timing cover — need this fixed before our sunrise departure. My E450 Godzilla decided to turn into more of a steam dragon than the beast it's supposed to be. After getting towed to a Ford dealer (because apparently not everyone wants to work on these motorhome monsters), they're telling me the timing cover surface where the water pump mounts looks "normal."

I'm staring at what looks like the surface of Mars - all pitted and grooved where the water pump was sitting. The dealer insists this is just typical wear, but my gut says something that caused a catastrophic overheat probably didn't leave the mating surface in "acceptable" condition. How do I know if this timing cover surface actually needs to be machined or replaced, or if I'm just being paranoid after my expensive towing adventure? …more

Read answer

Loading more Q&A...

You've seen all 31 Q&A articles!