Results for "pump relay"

Engine Hard 4-6 hours 171 👍 0

Ford F53 7.5L RV Won't Start: Fuel Pump Relay Voltage Drop Fix

Woke up to my 1996 Ford F53 7.5L motorhome eating through my patience and wallet with this no-start issue that keeps coming back. It cranks strong but absolutely will not start, and I've been chasing this problem for weeks now. The engine ran fine for about 3-4 minutes one day, then just died and hasn't started since.

I've already done quite a bit of diagnostic work:
- Replaced PCM and distributor
- Fuel pump works when powered directly
- Battery is fully charged
- Checked fuses and relays
- PCM relay voltage drops from 12.2V to 9.3V with key on
- Fuel pump relay only shows 3.3V at pin 86 (should be 12V)
- Inertia switch tested at 1.7V at connector
- ANL 178 fusible link fluctuates between 0.3-0.6V

The engine will only start with starter fluid when the SPOUT is removed. I'm getting only 5.5V at the fuel pump connector.

Has anyone dealt with this specific issue on an F53 chassis? I really need to get this RV back on the road and I'm running out of ideas! …more

Read answer

Engine Medium 2-3 hours 101 👍 0

Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point

Every Ford E450 I've worked on had the inertia switch behind the driver's panel — but my 2011 Freedom Elite 32r has it hidden somewhere completely different. The engine is experiencing what appears to be fuel delivery issues after a minor fender bender, and I suspect the inertia switch may have been triggered and needs to be reset.

I've already done extensive searching in the typical locations - removed both driver and passenger side kick panels completely, pulled out the glove box, and even partially disassembled sections of the dashboard. Despite checking all these common spots where Ford usually places these switches, I'm coming up empty-handed.

Could the switch be integrated into another component on this particular year and model? Are there any alternative locations specific to the E450 chassis or Freedom Elite configuration that I should be checking? I'm also wondering if some models of this year might not have a traditional standalone inertia switch at all. …more

Read answer

Slideouts Medium 45 minutes 99 👍 0

RV Electric Leveling Jacks Won't Extend - Fix Clicking Issue

Wondering if I should drop $800 on new electric leveling jacks or if this annoying clicking issue can actually be fixed first? The jacks were working perfectly fine on our last camping trip about two weeks ago, but now when I try to extend them, I can hear a distinct clicking sound coming from the controller panel, yet none of the jacks actually move or extend. The clicking happens consistently when I press the extend button, so it seems like the system is trying to respond, but something is preventing the actual mechanical operation.

I'm wondering what the most common causes are for this specific symptom - where you get the clicking from the controller but no actual jack movement. I'd like to understand the logical troubleshooting sequence, starting with the easiest things to check first before I dive into more complex diagnostics. The RV has been sitting plugged into shore power, but I know these systems can have multiple potential failure points including electrical, hydraulic, or control issues.

What should I be checking first, and what's the typical progression for diagnosing electric leveling jack problems that manifest with clicking sounds but no extension? …more

Read answer

Product Ranking 8 compared

Best RV Batteries

4.5 (15,400 reviews)

Electrical Medium 30-60 min 92 👍 0

Dead House Batteries on 50 Amp Shore Power: Troubleshooting Guide

Turned on my 2024 Entegra Reatta XL this morning to find the house batteries completely dead again despite being plugged into 50 amp shore power—third time this season and I'm done guessing. New batteries, good connections, power was working fine for days then died completely. Voltmeter shows 12.69V on chassis, 4.7V on house batteries at the BIM.

What's the proper troubleshooting sequence for house batteries not charging on shore power? Need to check converter, breakers, and connections but want to do this systematically. …more

Read answer

Engine Medium 2-3 hours 89 👍 0

Onan 7000 Generator Low Voltage to Fuel Pump: Complete Repair Guide

Our Onan 7000 Marquis generator is hitting us with low voltage to the fuel pump for the third time this season and I'm done with guessing games. When I check the voltage at the fuel pump, I'm only getting 9V instead of 12V, and surprise surprise - it won't start. But here's the kicker - if I jump 12V directly to the pump, the thing fires right up and runs like a champ.

Obviously there's a voltage drop happening somewhere between the control board and the fuel pump, but I'm not sure where to start looking. Could be corroded connections, maybe the control board itself is going bad, or some wiring issue in the fuel pump circuit? Anyone dealt with this before and know the most common culprits? …more

Read answer

Engine Medium 2-4 hours 86 👍 0

Ford F53 RV Fuel Pump Problems: Why They Fail & How to Fix Them Permanently

Got a neighbor with a 2007 Ford F53 motorhome that runs flawlessly while my 6.8L keeps burning through fuel pumps — what's his secret? The fuel pump has failed THREE times in just four years, and I'm scared there's something seriously wrong that's not being diagnosed properly. Each time the dealer just replaces the pump and says everything looks fine, but this can't be normal, right?

I'm starting to wonder if I'm doing something wrong with storage or if there's an electrical problem that's killing these pumps. The last thing I want is to get stranded somewhere dangerous because of another failure. Should I be worried about contaminated fuel? Could my storage practices be causing this? I really need to understand what's actually causing these repeated failures before I spend more money just replacing pumps that are going to fail again. …more

Read answer

Electrical Easy 30 minutes 86 👍 0

1988 Fleetwood Tioga Ford E350 Ignition Relay Location Guide

Last weekend I bought my first RV, a '88 Fleetwood Tioga Arrow (Ford E350 chassis, 460 V8), and I'm completely clueless why it won't start. I've already swapped out the starter solenoid on the fender, but now I'm being told there's also an ignition relay that could be the culprit.

Problem is, I can't for the life of me find this thing! I've been crawling around the engine bay for what feels like hours. Anyone know the typical spots where Ford hid the ignition relay on these E350s? Really don't want to start randomly pulling relays until I find the right one... …more

Read answer

Engine Easy 15 minutes 84 👍 0

2006 Fleetwood Tioga Fuel Shutoff Switch Location: Complete Guide

Tried everything to get my 2006 Fleetwood Tioga running after it started cutting out randomly yesterday, but can't even find the fuel shutoff switch. I think it might be related to the inertial fuel shutoff switch, but I honestly have no idea where to even start looking for it.

Could someone please help me understand where this switch is typically located on this model? I've heard it could be in a few different spots but I don't want to go tearing apart panels randomly. Any guidance on the most common locations would be really appreciated! …more

Read answer

Engine Hard Professional installation 82 👍 0

How to Convert Propane RV Generator to Diesel: Complete Fuel System Guide for Safe Installation

Before our two-week cross-country RV trip next month, I need to figure out this propane-to-diesel generator conversion because I'm getting conflicting advice and hearing horror stories about fuel starvation. My biggest concern is that if I just tap into the main fuel line with a simple tee fitting, I might end up starving either the engine or the generator when they're both running.

I'm worried I could damage something expensive or even create a dangerous situation. What are the proper ways to set up the fuel delivery system for a diesel generator conversion? I definitely don't want to just wing this - I need to know the safe, correct methods before I attempt anything. Should I be looking at a completely separate fuel system or are there ways to safely share the main tank? …more

Read answer

Engine Medium 1-2 hours 81 👍 0

1990 Tioga E-350 Won't Start: Complete DIY Troubleshooting Guide

Turned the key in our "new" 1990 Fleetwood Tioga E-350 and my wife immediately said "that's not starting, honey" — now I'm completely stumped. The engine turns over like it wants to start but just won't fire up. I've already replaced the fuel pump inside the tank, but I'm wondering if another pump might need replacement. I don't want to just start throwing parts at it. What's the best systematic approach to figure out why my Tioga won't start? Are there common failure points I should check first on these older E-350 based motorhomes? …more

Read answer

Solar Batteries Medium 1-2 hours 77 👍 0

How to Prevent LiFePO4 Battery Over-Discharge in RVs: Low Voltage Disconnect Guide

Planning a cross-country RV trip, but my Ecoflow Delta Pro keeps shutting down unexpectedly when running our AC, despite our 400ah LiFePO4 house batteries showing plenty of charge. Problem is the system drains our house batteries to 0% until the BMS shuts everything down.

Need a way to automatically cut power to the Ecoflow charger before the LiFePO4 batteries get too low. What's the best voltage cutoff point and what type of relay or disconnect device works for this application? …more

Read answer

Product Ranking 8 compared

Best RV Air Conditioners

4.4 (8,100 reviews)

Engine Medium 1-2 hours 75 👍 0

Ford F53 Motorhome Won't Start: Complete Troubleshooting Guide

Opened up my Allegro Bay 46 ft motorhome on a Ford F53 chassis after winter storage and now it won't turn over, dashboard lights are going crazy, AND the engine makes weird clicking sounds. When I turn the key, the warning lights cycle normally (except the check engine light, which does not turn on), and the engine turns over fine when I hit the starter. However, beyond that cranking action, absolutely nothing happens - no fuel delivery, no spark.

What I really need is a systematic approach to troubleshooting this F53 no-start condition. I want to make sure I check the most likely culprits first rather than randomly replacing parts. What are the common failure points on these F53 engines that cause this exact symptom pattern where it cranks perfectly but won't fire up at all? …more

Read answer

Electrical Medium 2-3 hours 74 👍 0

Braun RV Lift Stops Halfway & Loses Power: Troubleshooting Guide

Starting to think my Braun RV lift is eating through battery power way faster than it should, dying completely halfway up every single time. We have a Braun lift on our converted shuttle bus, and I'm running into a frustrating problem that has me stumped.

The lift works fine going up and it folds/unfolds without any issues. But when I try to lower it, it consistently stops about halfway down and the control button completely loses power. The only way I can get it working again is to manually raise or lower it using the hydraulic manual override, then the power comes back.

I'm wondering what typically causes this kind of behavior? Is this likely an electrical problem, something with the hydraulic system, or maybe a sensor issue? I'd appreciate any troubleshooting tips since I'm not sure where to start looking for the problem. …more

Read answer

Electrical Medium 1-2 hours 74 👍 0

How to Locate Your Intellitec BD-0 Disconnect Switch Latching Relay in Your RV

Last month what seemed like a simple electrical hiccup in my 2005 Ford E450 Isata 250SL has spiraled into a complete system meltdown. My Intellitec BD-0 disconnect switch isn't working properly and I suspect the latching relay might be the culprit, but I'm honestly afraid I'm going to damage something if I start poking around blindly.

I've been searching everywhere but I just cannot locate this latching relay! I don't want to accidentally disconnect the wrong thing or cause any electrical damage to my coach batteries. Where exactly should I be looking for this relay? I'm being very cautious because I know RV electrical systems can be dangerous if you mess with the wrong components. …more

Read answer

Engine Medium 2-4 hours for professional diagnosis 72 👍 0

2015 Winnebago Vista V-10 Pulsing During Acceleration Fix

Standing in front of a 2015 Winnebago Vista V-10 that pulses during acceleration — should I walk away or is this worth buying and fixing? My 2015 Winnebago Vista with the F53 chassis and V-10 engine developed this awful pulsing problem during acceleration after driving through mountain passes in Montana. It feels like the engine is cutting out then surging back - not rough idle or jerking, just this frustrating loss of power that comes and goes.

I've tried everything I can think of - checked vacuum hoses, inspected connections, even tried fuel additives thinking it was bad gas. The diagnostic scan only showed one code: "Fault received from External Node" which apparently relates to the instrument cluster, but the tech had no clue what that actually means or if it's connected to my acceleration problems.

What could be causing this pulsing issue on a V-10 after mountain driving? I'm hoping someone has seen this before because I'm running out of ideas and really need to get this figured out before my next trip. …more

Read answer

Loading more Q&A...

You've seen all 26 Q&A articles!