Results for "magnum"

My multimeter's out and I'm ready to tackle this RV electrical mess myself — pretty sure the inverter's the culprit but need to know where to start. I have a 2000 Winnebago Ultimate Advantage with four deep cycle house batteries and recently installed a Xantrex 758 inverter to replace my old Freedom 15 unit. The first time I tried using the inverter power while unplugged from shore power, something very strange happened - a hair dryer in the bathroom started running by itself and wouldn't shut off when I tried the switch. I had to unplug it, and the handle was warm. The hair dryer appears to be ruined now.

When I bought the Xantrex 758, I paid around $725 for what I thought was a good unit, but I'm now learning there's a difference between modified sine wave and pure sine wave inverters. I wasn't aware of this distinction when I made the purchase, and it turns out the 758 is a modified sine wave unit. I've since heard that modern electronics, especially things like residential refrigerators, computers, and sensitive electronic components, can be damaged by modified sine wave power.

I'm really concerned about potentially damaging my new residential refrigerator, stereo system, and computer equipment. Should I be worried about using this modified sine wave inverter with modern RV electronics? Is the hair dryer incident a sign that I need to upgrade to a pure sine wave unit, or are there other factors that could have caused this problem? I'm trying to understand if my current setup is putting my expensive electronics at risk. …more

Turned the key and nothing works on 12 volt — no lights, no water pump, no slides. Batteries show 12.6 volts on the multimeter so they're fully charged. House batteries seem fine but zero power is getting to any of the 12V circuits inside the coach. …more

About my 2007 Fleetwood Bounder: the MagnaSine MS2012 manual claims it should handle my loads perfectly, but this inverter keeps failing on me anyway. It's been acting up for months now - the microwave keeps causing it to hiccup and shut off, then it comes right back on. I know it's only going to get worse from here.

I've been looking at upgrading to something more reliable, maybe a Victron or another brand, but I'm honestly overwhelmed by all the options out there. What are the best replacement inverters that other RVers have had success with? I just want something that's going to work consistently without all these random shutdowns.

Before I spend a bunch of money though, could this actually be a battery issue instead of the inverter itself? I'd hate to replace a perfectly good unit if the real problem is somewhere else in the system. …more

Finally got a second opinion after my RV tech insisted I need an $800 replacement for my entire Magnum MS2012 inverter just because it won't charge my 2011 Fleetwood Providence's battery. I've got dual Magnum MS2012 inverter chargers that seem to charge the batteries fine through all the stages, but once they reach float mode, the voltage just keeps dropping and the chargers won't kick back in to maintain them.

I've already replaced all the batteries (both coach and chassis), cleaned and tested every solenoid I can find, and I'm still having the same issue. The coach is plugged into shore power, so that's not the problem. I've been digging through the control panel menus looking for float settings but I'm not finding what I need.

Could this be a settings issue with the Magnum units, or am I dealing with some kind of power drain that's too much for the float charge to handle? I've been chasing this problem for months and I'm really hoping someone has run into this before and can help me figure out what I'm missing! …more

Finally moved into an RV with a 20-year-old Tradewinds inverter/charger unit that's completely dead and I have absolutely no idea how to replace it. The repair shop is offering a used Magnum MS2812 (2800VA) for $700 installed, but I'm concerned about its actual charging capacity versus my requirements.

My RV is wired for 50A shore power service, and I need an inverter/charger that can handle the full charging load. The shop claims the MS2812 will work, but the specifications seem to indicate it's only a 30A charger unit. Are there any legitimate 50A inverter/charger options available under $1000, or should I be looking at different manufacturers like Progressive Dynamics or Aims for this price range? …more

Xantrex RV3012GS inverter is throwing a fault code and the repair shop wants $2,800 to fix it. Inverter is 8 years old and I'm debating between repair, buying a refurbished unit, or upgrading to something newer. What are my realistic options here? …more

Tried upgrading my RV's electrical system but I'm standing in the supply store staring at 12V versus 48V components with zero clue what I actually need. The Bluetti RV5 caught my eye as an all-in-one solution that might make the jump easier.

But honestly, I'm still on the fence. What are the real benefits of going 48V? Is it actually that much better than sticking with 12V lithium? And are there any gotchas I should know about, especially with solar integration and getting everything certified for RV use? …more

Looked inside my battery compartment and immediately hit with that acrid sulfur smell - my East Penn 6V AGM batteries are completely dead after a deep discharge. Last July, I installed six East Penn 6V house batteries and set the Magnum remote to AGM type. Left my coach at a shop for 2.5 weeks and came back to completely dead batteries - we're talking 8V dead, folks. Nothing worked: steps, lights, even my fancy electric shades decided to take a permanent nap. Chassis batteries were still okay.

After plugging in at home, the Magnum charger went through its whole song and dance - bulk charging at 100A, then eventually settled into float at 13.2V. When I unplugged and fired up the generator briefly, voltage dropped from 13.0V to 12.7V.

So here's my million-dollar question: did my deep discharge adventure turn these batteries into expensive paperweights, or do these voltage readings suggest they might have survived my negligence? I'm cautiously optimistic but honestly have no idea what signs indicate whether AGM batteries bounced back from the dead or are just pretending to be okay! …more

Replaced the DC connections on my Monaco Cayman's Magnum ME2012 inverter per the manual, but I'm still getting 50 amp fault codes and breaker trips. The remote console is consistently showing a 50 amp reading, which I know isn't normal operation. When I watch the unit go through its self-test sequence, it connects initially but then flashes several times before failing completely. The fault light starts flashing on and off intermittently, and eventually the shore power breaker trips entirely.

What's really concerning is that my batteries aren't charging at all during this process. I've read through the manual and it mentions that the inverter might need a reset to clear fault conditions, but I'm not sure if that's the right approach here or if there's something more serious going on. The combination of the 50A fault display, failed self-test, and the shore power breaker tripping makes me think this could be a significant electrical problem.

What steps should I take to diagnose whether this is a simple reset issue or if my ME2012 inverter has a more serious internal problem that needs professional attention? …more

Somewhere between realizing I need to configure my Magnum inverter's gel battery absorb time settings and blocking out Saturday for the job, I'm wondering what specs and tools to gather first. I'm upgrading my RV from AGM to gel batteries (specifically the NAPA 8272 model) and I've got a Magnum inverter controller that has a gel battery setting. Someone at the RV dealer mentioned I should double-check something called the 'absorb time' setting to make sure it matches my new batteries, but I'm honestly not sure what that means or how to find the right number. The manual isn't very clear to me. Has anyone else had to mess with these settings when switching to gel batteries? And does anyone happen to know what the absorb time should be for the NAPA 8272? I don't want to damage my expensive new batteries by having the wrong settings. Thanks for any help! …more