Results for "fleetwood-southwind"

Electrical Medium 2-6 hours 230 👍 1

ECM Low Battery Warning RV: Complete Diagnosis & Fix Guide

During a family trip, my 2005 Fleetwood Discovery 39S threw code 168-1 for low ECM battery voltage and went into full shutdown mode—is this dangerous with kids onboard? Engine cut out, transmission selector went dark, ABS warnings everywhere - the whole nine yards. Scared the heck out of me when it happened on the interstate!

I'm seeing this seems to be a thing with these diesel pushers, but I'm drowning in conflicting info online. Some say it's the chassis battery, others blame alternator issues, and I've even seen posts about ECM power supply problems on the Caterpillar engines. What's the actual step-by-step process to track this down? And more importantly, how do I fix it so it doesn't leave me stranded again? Really need a complete walkthrough of what causes this code and the proper repair approach. …more

Read answer

General Medium 30 min research 149 👍 0

Best Cummins 6.7 Scan Tools for RV Diesel Diagnosis & DPF Regen (2024

The internet seems to give me six different answers about which scan tool actually works with my 2019 Fleetwood's Cummins 6.7L—am I missing something obvious here? Need comprehensive coverage for reading and clearing fault codes, monitoring engine parameters, and performing forced DPF regeneration cycles.

Considering several options including the Foxwell HD500, Ancel heavy-duty scanners, and various BlueFire/Inline adapters available through different suppliers. Price ranges vary significantly from budget OBD2 adapters to professional-grade diagnostic equipment.

Looking for detailed comparison of available scan tools specifically for Cummins 6.7 applications - both professional-grade and DIY-friendly options. What are the key features, compatibility considerations, and real-world performance differences between the various diagnostic solutions for this engine platform? …more

Read answer

Exterior Hard 2-4 hours 126 👍 0

How to Fix RV Garage Door Delamination: Complete Repair Guide 2024

Finally facing the inevitable with my 1994 Fleetwood Jamboree Rallye garage doors that are 30 years old and completely delaminating at the seams — repair or replace? The extruded aluminum frame corners that are supposed to be screwed together are failing because the screws keep breaking under stress. What started as minor separation has now progressed to the point where the structural integrity of the entire door system is compromised.

I've noticed that not only are the corner joints failing, but the door panels themselves seem to be separating from their backing material, and the weather seals around the perimeter are starting to pull away as well. The doors don't close properly anymore, leaving gaps that let in water and debris. I'm concerned about further damage to the garage area and contents if I don't address this comprehensively.

I need a complete repair approach that addresses the delamination issue, reinforces the structural components, and replaces the failing seals. Simply adding corner braces feels like a band-aid solution, and I'm worried about drilling out the broken screws without causing more damage to the aluminum frame. What's the proper way to tackle this type of comprehensive garage door repair on an older RV? …more

Read answer

Product Ranking 8 compared

Best RV Leveling Blocks & Jacks

4.6 (9,800 reviews)

Engine Easy N/A - finding shop 110 👍 0

Ford F53 V10 RV Chassis Repair Shops Near Raleigh NC - Engine Service

My Ford F53 V10 is showing misfire codes P0301 and P0303, but my compression test reads 180 PSI when everything says it should be around 150 PSI. I'm located near Raleigh, North Carolina, and I need to get some mechanical work done - specifically repairs to the exhaust manifold bolts and air conditioning system work.

The problem I'm running into is that when I call Ford dealerships in the area, they keep telling me they don't work on motorhomes, even though it's a Ford chassis. This seems crazy to me since the engine and drivetrain components should be the same as other Ford vehicles. The exhaust manifold issue and AC problems are fairly standard automotive repairs, so I don't understand why the Ford connection isn't helping me here.

What type of repair facilities should I be looking for instead? Are there specific shops or service centers near Raleigh that specialize in F53 chassis work, or should I be approaching this differently? I just need somewhere that can competently handle these mechanical repairs on my motorhome without the runaround. …more

Read answer

Engine Medium 1 hour research 110 👍 0

Fleetwood Excursion Tire Upgrade Guide: 255 to 275 Width Conversion

After upgrading my 2015 Fleetwood Excursion M-35B from 255 to 275 width tires, it started getting sketchy handling on highway turns. The current 255/70R22.5 tires are wearing out and I'd love to go wider with 275/70R22.5 for better stability, but I keep getting conflicting advice from different tire shops.

Some say it's fine, others warn about clearance issues and potential problems. I really need to know what specific measurements I should check before making this change. What wheel width do I need? How do I verify there's enough steering clearance? I don't want to buy expensive tires only to find out they don't fit properly or aren't safe for my RV's load requirements. …more

Read answer

Slideouts Medium 1-2 hours 103 👍 0

Fleetwood Bounder Slide Out Reset: Fix Lost Stop Points & Controller Issues

Slide out lost its stop points during a power surge at the campground and now it extends way too far and retracts too deep. Fleetwood Bounder forum says I need to reset the controller but the process involves running the slide to its limits and I'm afraid of damaging the mechanism. …more

Read answer

Engine Medium 2-3 hours 101 👍 0

Fleetwood Discovery Generator Won't Start: Battery & Electrical Fixes Guide

Since the manual says to check the fuel shutoff solenoid first on my 1999 Fleetwood Discovery 37V diesel pusher generator, why am I getting power there while the battery connections are completely corroded? The generator absolutely refuses to start unless I run the main Cummins engine for several minutes first, and I've already tried using the boost battery switch which seems to do nothing.

I have brand new batteries - two 12V for the chassis and four 6V house batteries properly wired. Everything else works fine, but this generator issue has me concerned. I want to understand: 1) Why won't the gen set start from its batteries without the main engine running first? 2) Which battery bank does the gen set actually use - chassis, house, or a separate gen set battery?

I'm 80 years old and hesitant to crawl under the coach to trace the gen set 12-volt cable. Can someone help me understand what might be happening with my generator's electrical system? …more

Read answer

Plumbing Medium 1-2 hours 101 👍 0

RV Heater Lines Reversed: How to Diagnose and Fix Hot Dashboard Air

Dashboard vents are blowing hot air even with the heater off and the AC running. Drove three hours in 95-degree heat with hot air hitting my face the whole time. Mechanic says the heater hose lines might be reversed from a previous repair job. …more

Read answer

Exterior Medium 30 min work plus 24-48 hour cure 100 👍 0

How to Fix RV Window Separated from Crank Mechanism - Step-by-Step Repair Guide

Pulled open my 2015 Fleetwood Expedition 40X kitchen sink window only to find it completely separated from the metal crank arm mechanism - now debating between calling a mobile RV tech or tackling this DIY. During my last camping trip, I noticed the window was loose and flapping around in the wind, which was both annoying and concerning. When I got back and examined it more closely, I can see that the bond between the glass and the crank mechanism has failed entirely.

I know I need to reattach it with some kind of adhesive, but I'm overwhelmed by all the different options out there. I've seen mentions of products like 3M Windo-Weld and various Sikaflex formulations (like 221, 255, 291), but I'm not sure which one is specifically designed for this type of repair. I also want to make sure I do this right the first time since it's such an exposed area that takes a beating from weather and road vibration.

What's the best adhesive for rebonding a frameless glass window to its crank mechanism, and what's the proper process to ensure it holds up long-term? I want to make sure I clean the surfaces properly and give it adequate curing time before I start operating the window again. …more

Read answer

General Easy 30 min research 99 👍 0

2001 Fleetwood Flair Parts: Complete Guide to Finding OEM & Replacement Parts

Pulled into my driveway after my local RV dealer closed down last year, and now finding OEM parts for my 2001 Fleetwood Flair 33R has become a complete nightmare. Ford has discontinued so many of the OEM components I need, and the usual RV parts suppliers keep coming up empty. I've been searching for months now and I'm starting to worry I'll never get this thing roadworthy again.

I know there have to be salvage yards out there with Fleetwood parts, but I don't know where to look or how to search effectively. Are there online platforms specifically for RV salvage? How do you even cross-reference parts when the original numbers are discontinued? I'm willing to try anything at this point - used parts, aftermarket alternatives, whatever works. Someone please tell me there's a systematic way to track down these elusive components! …more

Read answer

Chassis Hard Research and planning phase 96 👍 0

Ford F53 Godzilla V8 Suspension Problems: Fixes & Upgrades for Class A Motorhomes

Halfway through my first long trip, this bone-rattling vibration and unsettling sway started plaguing my newer Class A motorhome with the Ford F53 Godzilla V8 chassis. Coming from a 26' travel trailer and a history with brands like LazyDaze, I'm trying to understand the current RV landscape. I saw a Baystar 2023 model where the owner spent around $35,000 on suspension upgrades after just 12,000 miles.

Sounds awesome on paper, but I keep hearing people say you still need to dump a ton of money into suspension upgrades to make these things handle decently on the highway. Did Ford actually improve the suspension setup when they introduced the Godzilla engine, or are we dealing with the same basic chassis design that's been around forever? I'm talking about 30+ foot Class A rigs here - seems crazy that a $200k motorhome would need immediate aftermarket work to drive safely.

Anyone know if the Godzilla F53 combo actually fixed the handling problems or if it's just more power on the same wobbly platform? …more

Read answer

Product Ranking 8 compared

Best RV Refrigerators

4.3 (9,200 reviews)

Engine Medium 1 hour 91 👍 0

How to Diagnose RV Hard Starting Problems: Fuel System Troubleshooting Guide

RV cranks for 10-15 seconds before finally firing up, and it's getting worse each week. Used to start on the first crank every time. Fuel pressure seems low at the rail but I'm not sure if it's the pump, filter, injectors, or something else entirely in the fuel system. …more

Read answer

Solar Batteries Medium 2-3 hours 87 👍 0

How to Install a Lithium Battery Manager Relay in Your RV - Complete Guide

Got my weekend planned to install a lithium battery manager relay in my 1999 Fleetwood American Dream Saturday — what should I have ready beforehand? I understand these relays are crucial for protecting lithium batteries from overcharging by managing the connection to the alternator, but I want to make sure I understand the complete installation process before I start.

I'm looking for detailed information on how these battery manager relays function - specifically how they disconnect the batteries from the alternator when charging isn't needed. More importantly, I need step-by-step guidance on the actual wiring process, including how to properly connect the relay between my alternator/converter and the new lithium battery bank. I'm particularly concerned about getting the fusing right and understanding what control circuits are involved in this setup.

This is a significant electrical modification to my RV's charging system, so I want to ensure I have all the technical details covered before I begin the installation. Any comprehensive guidance on the complete process would be extremely helpful. …more

Read answer

Solar Batteries Medium 3-4 hours 85 👍 0

Can You Remove an RV Inverter Charger Without Replacement? (Yes, Here'

Called three RV supply shops about replacing my failed Xantrex inverter/charger in my 2001 Fleetwood Expedition — but do I even need one or just wasting money? Since I never utilize the inverter function and rely exclusively on generator or shore power for 120V loads, I'm evaluating whether complete removal is feasible rather than expensive replacement.

My primary concern is maintaining proper 12V DC charging capabilities for house batteries that power lighting, water pump, and ventilation systems. Would installing a standalone battery charger provide adequate charging and maintenance functionality? Are there any critical system integration issues I need to address, particularly regarding power transfer switching between shore power and generator sources? …more

Read answer

Electrical Easy 30 minutes 85 👍 0

1988 Fleetwood Tioga Ford E350 Ignition Relay Location Guide

Last weekend I bought my first RV, a '88 Fleetwood Tioga Arrow (Ford E350 chassis, 460 V8), and I'm completely clueless why it won't start. I've already swapped out the starter solenoid on the fender, but now I'm being told there's also an ignition relay that could be the culprit.

Problem is, I can't for the life of me find this thing! I've been crawling around the engine bay for what feels like hours. Anyone know the typical spots where Ford hid the ignition relay on these E350s? Really don't want to start randomly pulling relays until I find the right one... …more

Read answer

Loading more Q&A...

You've seen all 43 Q&A articles!