Results for "carbon"

Engine Easy N/A 164 👍 0

Ford V10 Triton Engine Maintenance Guide: EGR Delete vs Regular Service Tips

Spent years doing regular EGR maintenance on my old gas motorhome without issues — but this 2007 Fleetwood 31' Tioga with Ford V10 Triton has me second-guessing everything. I keep reading conflicting information about EGR delete procedures on V10 engines, and I'm worried I might make things worse if I mess with it.

Is the EGR delete modification actually necessary on this 2007 3-valve V10, or am I overthinking this? I don't want to void any warranties or create problems that weren't there before. Would I be better off just sticking to regular maintenance instead of modifications? I'm looking for reassurance that I'm taking the right approach to keep this engine running reliably for years to come. …more

Read answer

Propane Hard 6-8 hours 149 👍 0

Atwood GC10A-4E Replacement: Best Tankless RV Water Heater Upgrades 20

Halfway through draining my Atwood GC10A-4E's supposed 10-gallon capacity, the water's already running cold but my gauge shows I've only pulled maybe 6 gallons. Are there any dual-fuel tankless units that would work as a replacement? I know there's no plug-and-play option, but what are the best tankless water heaters that offer both gas and electric operation for RVs? …more

Read answer

Slideouts Medium 2-3 hours 115 👍 0

RV Slide Out Moving Slowly? Complete Lubrication & Repair Guide [2024]

I tried everything I could think of, but after all that heavy rain last week, my slide out went from smooth operation to moving like molasses. It sounds like it's really struggling and straining, making these awful grinding noises that have me worried I'm going to break something expensive.

I've been reading that lubrication might be the answer, but I honestly don't know where to start. Should I be looking at the motor mechanism? The tracks? I've heard about hydraulic fluid but I'm not sure if my system is hydraulic or electric. I really need someone to walk me through what needs lubrication and what else I should check before this thing stops working completely!

Could you help me troubleshoot? Details that might help: Can you tell me the specific model of my RV and the type of slide out system it uses? …more

Read answer

Product Ranking 8 compared

Best RV Surge Protectors

4.6 (14,200 reviews)

Engine Medium 3-4 hours 97 👍 0

Cummins ISL Code 1896: EGR Valve Controller Gaskets & Repair

About to drop $2,800 on my Cummins ISL throwing code 1896 for EGR valve controller out of calibration and wondering if I can tackle this myself. Planning to pull and clean the EGR valve controller to see if that clears it up.

Do I need to order replacement gaskets before I start this job? Want to make sure I have everything on hand before I tear into it. …more

Read answer

Engine Medium 2 hours 97 👍 0

Ford V-10 Misfire Codes P0305 & P0307: Complete RV Engine Repair Guide for Motorhomes

Turned my compression tester on cylinders 5 and 7 and got 150 PSI readings, but I'm still pulling P0305 and P0307 misfire codes on my 2001 Ford E350 V-10. The engine runs smoothly overall, but the diagnostic codes are persistent.

I have replacement spark plugs and ignition coils available but want to ensure I'm following the proper troubleshooting sequence before investing time and effort. What is the recommended diagnostic approach for simultaneous misfires on cylinders 5 and 7?

Given that multiple cylinders are affected, should I prioritize certain components over others, or is there a systematic order that typically yields the most efficient resolution for this engine configuration? …more

Read answer

Propane Medium 30-60 minutes 95 👍 1

Atwood AFMD35 Furnace Playing Peek-a-Boo - How to Clean Flame Sensor & Fix Short Cycling

Staring at my Atwood AFMD35 manual that claims it should stay running once lit, but mine keeps shutting off every few minutes like it's playing peek-a-boo. It fires up beautifully for about 5-10 seconds, gets my hopes up that I won't freeze tonight, then promptly shuts off like it's having second thoughts about this whole "heating the RV" thing.

I've ruled out the sail switch and high temp limit since it actually lights (small victories in RV life, right?). I'm pretty sure the flame sensor is the culprit here, but I've never cleaned one before. How do I clean this mysterious little part, and what's the best way to access it on this model? Because apparently my furnace thinks playing hard-to-get is charming! …more

Read answer

Engine Medium 1-2 hours 95 👍 0

Ford F53 V10 Bypass Oil Filter Installation: Best Mounting Locations for RV Chassis

Walked out to check my oil analysis results and they're showing 15-micron contaminants, but everything says my 2003 F53 V10's factory filter catches down to 25 microns. I've been reading about how these can help extend oil life and keep things cleaner, but I'm honestly not sure where the best place to mount one would be.

I've seen some people mention sandwich adapters at the original filter location, remote mounting blocks, and even tapping directly into the engine block. As someone who's still learning, I don't want to mess this up or create problems down the road. What's considered the best practice for mounting location on the F53 V10? I'd really appreciate some guidance from those who have done this before. …more

Read answer

Engine Medium 2-4 hours 94 👍 0

Ford E450 V10 Spark Plug & Coil Replacement Guide - RV Engine Maintenance Tips

After handling coil swaps on my old Chevy like they were nothing, this Ford E450 V10 setup has me completely intimidated and second-guessing everything. I've heard cylinder #3 is particularly difficult to access and I'm scared I might break something or use the wrong tools.

I tried using a 7mm wrench like some sources suggested, but it doesn't seem to fit properly and I'm afraid of stripping the bolt heads. I'm also concerned about how to safely reach the coils without damaging other components.

Can someone please walk me through the safest approach and tell me exactly what size wrench I should be using? I'd rather ask for help than risk making an expensive mistake. …more

Read answer

Propane Medium 1-2 hours for diagnosis 92 👍 0

AquaHot 450D Frequent Cycling: Troubleshooting Guide & Solutions

Since my 8-year-old AquaHot 450D started firing up every 15 minutes with zero hot water or heating demand, should I repair or replace it? It's more frequent at night when temps drop. No fault codes showing.

Is this normal cycling behavior? I'm thinking something might be causing heat loss or keeping the system active when it should be idle. …more

Read answer

Engine Medium 1 hour 91 👍 0

How to Diagnose RV Hard Starting Problems: Fuel System Troubleshooting Guide

RV cranks for 10-15 seconds before finally firing up, and it's getting worse each week. Used to start on the first crank every time. Fuel pressure seems low at the rail but I'm not sure if it's the pump, filter, injectors, or something else entirely in the fuel system. …more

Read answer

Slideouts Medium 2-4 hours 90 👍 0

Lippert Power Gear Slide Motor Replacement: Complete Guide to Parts &

Walked out to prep our RV this morning and discovered our Lippert Power Gear slide motor is making grinding noises and won't extend properly. My RV's slide motor is failing and I'm trying to figure out the best way to get replacement parts. The slide is getting sluggish and I suspect it's either the motor brushes or possibly something in the gearbox itself.

I've been searching everywhere for Lippert Power Gear parts but I'm not sure where to look or what my options are. As it stands, the replacement parts are ridiculously expensive - a $100 gearbox, $50 brake, and $100 motor, but Lippert wants nearly $1000 for the whole assembly. I just want to replace the brushes, but they won't even sell those separately!

Can I buy just the motor component, or do I need to replace the entire gearbox assembly? I really need to know where I can actually purchase these parts and how to determine whether it's a motor issue or a gear problem before I spend a fortune on the wrong repair! …more

Read answer

Product Ranking 8 compared

Best RV Sewer Hoses & Kits

4.6 (31,500 reviews)

Engine Medium 3-4 hours 89 👍 0

Ford F53 Chassis Misfire Problems: Early Spark Plug & Coil Failure Solutions

Walked out to my 2021 Class A motorhome this morning facing the third Ford F53 chassis misfire this year and I'm done throwing parts at it blindly. We've got less than 20,000 miles on the odometer, but recently experienced rough running and got a check engine light. When I took it to a Ford dealer that services Class A rigs, they diagnosed misfires in two cylinders and recommended servicing the entire fuel system. I ended up having them replace all eight spark plugs, plug wires, and ignition coils since we were already dealing with failures.

The coach now runs better than it ever has since new, which makes me think the original components may have been subpar from the factory. What's really bothering me is that we shouldn't need major ignition system work this early in the vehicle's life. I'm curious if other owners of 2021 or newer F53 chassis motorhomes have experienced similar premature failures with their spark plugs, ignition coils, and plug wires? Is this pointing to some kind of quality control issue with Ford's ignition components on these newer chassis, and should I expect better reliability from aftermarket replacements going forward? …more

Read answer

Engine Easy Informational 87 👍 0

Honda EU2200i Generator: Can It Charge a 330Ah RV Battery Bank?

Camping off-grid next week with a 330Ah lithium battery bank and wondering if my Honda EU2200i can keep up. Last trip the generator ran for six hours and the batteries still weren't fully charged. Need to know if this little generator can realistically maintain a bank that size. …more

Read answer

Engine Medium 2-3 hours 86 👍 0

Why Your RV Generac Diesel Generator Shuts Off After 2 Minutes Under Load: Troubleshooting Guide

Found that ever since those heavy rains last month hit, my 2007 Alfa's Generac 7.5kw diesel generator shuts down exactly 2 minutes after firing up the basement AC.

Just did a full service (oil, filters, the works) so it's not basic maintenance stuff. I can restart it right after it shuts off, but if the AC is still calling for power, it dies immediately again. No error codes or blinking lights to give me a clue.

Is this a fuel delivery issue where it can't keep up with the AC load? Or am I looking at something else entirely? Really hoping someone's dealt with this exact same 2-minute thing before! …more

Read answer

Electrical Medium 30-60 minutes 85 👍 0

Surge Guard 40250-RVC vs 40350-RVC Transfer Switch: Complete Comparison Guide

This 8-year-old transfer switch is getting sluggish during power transfers — worth repairing or should I just upgrade to a newer Surge Guard model? I currently have a Surge Guard 40250-RVC in my 2013 motorhome, but I'm having trouble finding that exact model for replacement. All I can seem to find available is the 40350-RVC model.

My current unit has started making a buzzing sound when connected to shore power. Everything still seems to work fine, but I've heard this might indicate the contacts are starting to fail. I'd rather replace it before it completely goes out and leaves me without power.

Can anyone tell me if the 40250-RVC and 40350-RVC are interchangeable? And should I be concerned about the buzzing, or is there anything I can check before replacing the whole unit? …more

Read answer

Loading more Q&A...

You've seen all 53 Q&A articles!