Results for "steering problems"

Engine Medium varies 240 👍 1

Michelin RV Tire Problems: Complete Guide & Solutions 2024

Standing in my driveway planning to tackle these serious handling issues with my new Michelin Agilis HD Z 245/70R19.5 tires on my 2018 Winnebago Vista LX 27N this Saturday — what should I check first? The RV now has 25k miles, and since switching from Goodyear tires, I'm experiencing terrible tail wag - especially when towing my 2024 Toyota Tacoma and in windy conditions.

I've tried multiple tire pressures (82 psi from door sticker, 110 psi from installer, up to 100 psi) but nothing resolves the side-to-side movement. I have several stability modifications installed (Rear Trac Bar, Aux Roadmaster Rear Swaybar, Front Roadmaster Swaybar, Koni FSD shocks), which previously helped with handling.

The movement feels like the towed truck is actually pushing the RV's rear side-to-side, making driving extremely uncomfortable. I'm within Michelin's 60-day/2500-mile buy-back period and want to understand why these tires are performing so differently from my previous set.

Could experienced RV owners help me diagnose what might be causing these handling problems? …more

Read answer

Engine Medium 1 hour research 110 👍 0

Fleetwood Excursion Tire Upgrade Guide: 255 to 275 Width Conversion

After upgrading my 2015 Fleetwood Excursion M-35B from 255 to 275 width tires, it started getting sketchy handling on highway turns. The current 255/70R22.5 tires are wearing out and I'd love to go wider with 275/70R22.5 for better stability, but I keep getting conflicting advice from different tire shops.

Some say it's fine, others warn about clearance issues and potential problems. I really need to know what specific measurements I should check before making this change. What wheel width do I need? How do I verify there's enough steering clearance? I don't want to buy expensive tires only to find out they don't fit properly or aren't safe for my RV's load requirements. …more

Read answer

Engine Easy 15 minutes 105 👍 0

5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide

Planning to tune my 2018 Ford 6.8L V10 RV but got quoted $800 for professional tuning and wondering if the 5 Star X4 is DIY-friendly. Specifically want to know about real-world performance improvements - does it actually improve throttle response and shift points? What about fuel economy gains?

Which of the 3 programs works best for RV towing? Is the investment worth it for better drivability or just hype? …more

Read answer

Product Ranking 8 compared

Best RV Batteries

4.5 (15,400 reviews)

Electrical Medium 1-2 hours 104 👍 0

Ford F53 RV Chassis: All Headlights Out - Complete Diagnosis & Repair

Pulled out my multimeter on this dead F53 headlight situation and I'm getting 12.4V at the relay when every Ford manual says it should read 12.6V. My 1999 Mountain High Pinnacle Class A with 76,000 miles on a Ford F-53 chassis has me stumped - ALL four headlights (both high and low beams) just went completely dead, but here's the weird part: every single other light works perfectly. Taillights, brake lights, turn signals, markers - they're all fine.

When the headlight switch is on, there are no headlights at all, and the blue high beam indicator remains constantly lit. I noticed a strange clicking sound from under the hood about every 20-25 seconds, which continued even after disconnecting the coach and chassis batteries.

I've already replaced the headlight switch thinking that was the culprit, but the same problem persists. No headlights whatsoever when I flip the switch, whether I'm on high or low beam. I'm starting to think it might be the combination switch or maybe a relay with a potential dead short, but I don't want to start throwing parts at this thing without some guidance.

Has anyone dealt with this exact scenario on a late 90s Ford chassis? What should I be checking first? I really need to get this sorted out before my next trip. …more

Read answer

Electrical Medium 2-4 hours 101 👍 0

RV Dash AC Blower Motor Not Working? Check These Hidden Fuses First

Last week I'm trying to decide between shelling out hundreds for an RV tech or tackling this myself after my F53 chassis motorhome's dash A/C blower motor completely died. I've checked all the obvious fuses in the main fuse panels, but nothing seems blown.

I discovered something crucial that might help others: Fleetwood added a hidden 25 amp fuse wire-tied above the emergency brake, not shown in standard Ford chassis diagrams. In my case, this was the culprit. As a temporary fix, I even ran a wire directly from my lighter plug with a switch to get some air movement.

I'm wondering if other RV owners might have similar hidden electrical components that aren't in standard chassis wiring documentation? Before taking it to a shop, I recommend carefully checking behind panels and tracing wires, especially looking near the dashboard area above the emergency brake for manufacturer-specific fuses. …more

Read answer

Engine Easy 20 min read 100 👍 0

RV Wheel Alignment Guide: Warning Signs, Cost & When to Get Service

This Class A Freightliner Chassis alignment I finished yesterday still pulls hard left through those tight campground turns — did I mess something up? who knew? 🙄

Now I'm dealing with some funky tire wear patterns and my rig seems to have developed a mind of its own on the highway - it's pulling to one side like it's trying to make an unscheduled scenic detour. I'm pretty sure I need a wheel alignment, but honestly, I have no clue what warning signs to look for or how often this service should be done.

What are the telltale signs that scream 'GET AN ALIGNMENT NOW!'? I'm specifically looking for recommendations near Glendale, AZ, and I've heard mixed things about Bell Road RV. How do I find a shop that actually knows what they're doing with big rigs like my Freightliner? And what should I expect to pay for this delightful reality check? Any guidance would be awesome before I end up as one of those viral RV fail videos! …more

Read answer

Chassis Hard Research and planning phase 96 👍 0

Ford F53 Godzilla V8 Suspension Problems: Fixes & Upgrades for Class A Motorhomes

Halfway through my first long trip, this bone-rattling vibration and unsettling sway started plaguing my newer Class A motorhome with the Ford F53 Godzilla V8 chassis. Coming from a 26' travel trailer and a history with brands like LazyDaze, I'm trying to understand the current RV landscape. I saw a Baystar 2023 model where the owner spent around $35,000 on suspension upgrades after just 12,000 miles.

Sounds awesome on paper, but I keep hearing people say you still need to dump a ton of money into suspension upgrades to make these things handle decently on the highway. Did Ford actually improve the suspension setup when they introduced the Godzilla engine, or are we dealing with the same basic chassis design that's been around forever? I'm talking about 30+ foot Class A rigs here - seems crazy that a $200k motorhome would need immediate aftermarket work to drive safely.

Anyone know if the Godzilla F53 combo actually fixed the handling problems or if it's just more power on the same wobbly platform? …more

Read answer

Electrical Medium 1-2 hours 93 👍 0

How to Fix RV Rear Brake Lights and Hazards Not Working - Common Grounds & Connections

Spent months planning our cross-country trip leaving next week and my RV's rear brake lights and hazards just completely stopped working. My 1998 National Tropical (on a '97 Ford F53 chassis with the trusty 460 V8) has decided to get creative with its lighting situation. The rear brake lights and 4-way hazards have completely given up the ghost - nothing, nada, zero response from the back end. But plot twist: the turn signals work just fine back there, and everything up front (brake lights, hazards, turns) is working perfectly.

I'm scratching my head because if it was a fuse issue, wouldn't ALL the lights be affected? The fact that some work and others don't has me thinking it's something more specific. Any ideas where I should start poking around to solve this electrical mystery? …more

Read answer

Chassis Medium 2-4 hours 89 👍 0

F53 Hydroboost Brake System Problems: Complete Repair & Troubleshooting Guide

Between the small hydraulic leak that started on my 1995 F53 hydroboost brake system last month and what's happening now, I'm wondering how much worse this nightmare can get. Right now it's just a slow drip - maybe one drop per minute - and I can feel the power steering is slightly stiffer than normal, plus the brake pedal requires a bit more effort than usual.

What I really need to understand is the theory behind how hydroboost systems operate, since this is different from the vacuum brake boosters I'm used to. More importantly, if this leak gets progressively worse and I don't address it immediately, what's my worst-case scenario? Will I completely lose power steering and power braking assistance, or would I still have manual control of both systems? I'm trying to figure out whether this is something I need to drop everything and fix right now, or if I have some time to plan the repair properly. …more

Read answer

Engine Easy 15 min visual, 1 hour full 89 👍 0

Ford F53 Motorhome Brake Inspection: Complete Guide to Checking Rotors and Pads

Turned onto that steep mountain grade last week and heard grinding from my 2014 F53 chassis, but I can't figure out how to properly inspect the brake pads and rotors. I've been crawling around under there, contorting myself into every possible position, but I just can't get a good view of the brake components through the wheel openings.

Is there a specific technique or approach that actually works for getting a proper look at the pad thickness and rotor condition? I really want to stay on top of brake maintenance, but the limited visibility is making this nearly impossible. Should I be using special tools, or is there a better method I'm missing? …more

Read answer

Chassis Medium 3-4 hours 89 👍 0

2003 Ford F53 RV Chassis Wheel Bearing Grease Guide - Best Products &

I'm wondering if my grease choice is wrong for my 2003 Ford F53's front bearing replacement when my neighbor's identical motorhome runs perfectly after his service. The original grease that came out was a dark gray/black color and while there wasn't any catastrophic damage, the races showed enough wear marks that I decided to replace everything while I'm in there.

I've been researching different options and keep seeing conflicting recommendations. Some people swear by standard lithium grease, others recommend full synthetic formulations, and I've even seen mentions of specific brands like Valvoline MaxLife and Timken. I know the F53 chassis carries significantly more weight than a typical pickup truck, so I want to make sure I'm using something that can handle the load.

I have the torque procedure down (30 ft-lbs initial, back off, then final setting at 17 in-lbs), but I want to make sure I'm pairing that proper installation with the right grease. What specific grease products work best for the F53 front wheel bearings, and are there any compatibility issues I should be aware of when selecting a replacement grease? …more

Read answer

Product Ranking 8 compared

Best RV Generators

4.6 (18,900 reviews)

Engine Medium 2-3 hours 87 👍 0

Ford E450 RV Tire Cupping: Causes, Diagnosis & Complete Fix Guide

Walked out to our 2017 Ford E450 Class C this morning and noticed dangerous washboard-like tire cupping on the front right - is this safe with grandkids aboard? Left side is starting to join the party too. Here's the weird part though - this beast still tracks straight as an arrow, no steering wheel shimmy, turns fine, and when I jack it up the tire doesn't wiggle around like a loose tooth.

I'm scratching my head because everything LOOKS fine. Suspension components seem solid, shocks aren't leaking like my wallet at RV parks. But could the shocks actually be shot at only 36,000 miles? And more importantly - if I just slap new tires on this thing without fixing the root cause, am I just going to end up with expensive cupped tires again? …more

Read answer

General Easy 30 min to 2 hours 86 👍 0

How to Adjust E-450 RV Captain Chair Armrest Height: 3 Proven Solutions for Comfort

Our first E-450 RV came with these captain chair armrests ridiculously high and we're completely lost on how to fix this uncomfortable mess. Are these factory adjustable or can they be lowered somehow? Looking for practical solutions to fix this armrest height issue. …more

Read answer

Chassis Medium 1-2 hours 86 👍 0

F53 Death Wobble DIY Fix: $20 Panhard Bar Solution

Between 60-70 mph my F53 chassis motorhome's steering wheel started violently shaking yesterday and now I'm terrified to drive anywhere. It's really scary when it happens - the whole front end starts shaking violently after hitting certain bumps or potholes.

I've been reading that this might be related to something called a panhard bar or lateral axle movement, and that there are expensive commercial solutions like the Roadmaster Tru-Trac that cost $500-700. But I'm not even 100% sure that's what's causing my problem.

Is there some kind of inexpensive way I could test or temporarily fix this issue to confirm what's actually wrong before I spend that much money? I'm reasonably handy but don't want to make things worse. Any guidance would be really appreciated! …more

Read answer

Electrical Medium 2-4 hours 85 👍 0

Ford F53 V10 Cam Sensor No Start: Step-by-Step Repair Guide 2024

Somewhere between last week's torrential downpour and this morning, my 2014 Bounder Classic 36H with the 2013 Ford F53 V10 chassis developed what appears to be a cam sensor failure preventing startup. The engine cranks over strong but absolutely will not start. I've been chasing this for weeks and I'm really hoping someone can point me in the right direction.

Here's what I know: Forscan is showing cam sensor faults while cranking, even after I replaced the cam sensor. I've got fuel pressure, the crank sensor is new, and there are no stored codes. The tachometer moves during cranking attempts, so I know I'm getting some signal. After crank attempts, there's a strong fuel smell. I've disconnected the battery ground for over 5 minutes to reset any hanging codes.

I'm starting to suspect this might be a wiring harness issue or possibly something with the timing chain. I have a tone generator on the way to check for potential wire breaks. The frustrating part is that everything seems like it should work, but it's like the PCM isn't getting the right timing information.

I really need guidance on the most likely culprits for cam sensor faults on these V10s. What should I be focusing on to get this thing running again? …more

Read answer

Loading more Q&A...

You've seen all 57 Q&A articles!