Results for "oil filter"

Exterior Medium 3-4 days (includes curing time) 235 👍 1

DIY RV Basement Door Paint Repair: Complete Guide & Cost Analysis

Despite protecting my RV all winter, those brutal summer months have absolutely destroyed the paint on my four basement doors and rear wheel area across 2' x 20', leaving me staring at a $5,000-6,500 shop estimate versus DIY with my compressor. I've never done automotive paint work before. Could I really achieve decent results for under $500 like I keep reading online? I'm concerned about proper paint matching, whether I'll damage the surface during prep, and if I choose the wrong spray gun or technique.

Has anyone successfully tackled RV exterior panel paint repair as a DIY project? I need reassurance that this is actually doable without professional training, and guidance on the complete process from start to finish. …more

Read answer

Engine Hard 2-3 hours for diagnosis 171 👍 0

1999 F53 V10 Oil in Coolant: Complete Head Gasket Diagnosis & Repair Guide

Called three dealerships about warranty coverage for oil contamination in my 1999 Ford F53 V10's coolant system — before I tackle this head gasket nightmare myself. The unit overheated after the oil level dropped significantly, though it still starts and runs without throwing any codes.

Based on the symptoms, I suspect a blown head gasket, but I want to perform proper diagnostic testing before committing to a major repair. What specific diagnostic procedures should I run to confirm whether this is actually a head gasket failure versus other potential causes like a cracked head or block issue?

Looking for a systematic approach to pinpoint the exact problem before I start tearing into this engine. …more

Read answer

Engine Easy N/A 164 👍 0

Ford V10 Triton Engine Maintenance Guide: EGR Delete vs Regular Service Tips

Spent years doing regular EGR maintenance on my old gas motorhome without issues — but this 2007 Fleetwood 31' Tioga with Ford V10 Triton has me second-guessing everything. I keep reading conflicting information about EGR delete procedures on V10 engines, and I'm worried I might make things worse if I mess with it.

Is the EGR delete modification actually necessary on this 2007 3-valve V10, or am I overthinking this? I don't want to void any warranties or create problems that weren't there before. Would I be better off just sticking to regular maintenance instead of modifications? I'm looking for reassurance that I'm taking the right approach to keep this engine running reliably for years to come. …more

Read answer

Product Ranking 8 compared

Best RV Awnings & Accessories

4.5 (7,600 reviews)

Engine Easy 1-2 hours inspection 146 👍 0

Ford E450 V10 Reliability: Expected Mileage and Longevity Guide for RV Owners

Nobody prepared me for staring at this 2018 Jayco Greyhawk 29MVP with Ford E450 chassis showing 54,000 miles and wondering if I'm looking at a money pit. The unit appears well-maintained with quality features including auto-leveling, fiberglass roof and nose, plus J-ride suspension. However, the odometer shows 54,000 miles, which exceeds my initial target range.

I need to assess whether this mileage represents significant wear on the E450/V10 drivetrain combination. What is the typical service life expectation for these engines when properly maintained? At what point should mileage become a primary concern versus overall mechanical condition? …more

Read answer

Ac Refrigeration Easy 30 minutes 131 👍 0

RV AC Freezing Up? Fix Ice on Coils in 5 Steps

Turned on my RV's AC as a total newbie and watched it run perfectly for an hour before becoming a frozen disaster that won't cool. I can literally see ice building up on the coils, and then it's game over until everything thaws out.

This has happened a few times now and I'm getting tired of sitting in a hot RV waiting for the thing to defrost. What actually causes AC units to freeze up like this? And more importantly, how do I stop it from happening again? I'm guessing it's something simple I'm missing, but I'd rather fix it right than keep dealing with this cycle. …more

Read answer

Engine Easy N/A 130 👍 0

Ford E-350 vs E-450 Chassis: RV Fuel Economy, Power & Weight Capacity

Last weekend I felt this awful engine strain and heard sluggish acceleration sounds while test-driving a 2017 Phoenix Cruiser #2351 with its E-350 chassis and V10 engine. I'll be doing extensive western touring through mountain and plains regions, which means substantial mountain grades and wind challenges. I'm comfortable driving slowly and want to understand two key things: 1) Will this E-350 chassis handle mountain grades without major issues, and 2) What's the real-world fuel consumption like? I plan to do an initial inspection this weekend, followed by a third-party mechanical review. I'm not overly concerned about fuel economy but want to understand the actual performance limitations. I'd appreciate insights from owners who have experience with similar touring conditions on an E-350 chassis. …more

Read answer

Ac Refrigeration Medium 2-3 hours 128 👍 0

Dometic RV AC Not Cooling? 5 Common Fixes for Air Conditioner Troubleshooting Guide

Walked out to my RV this morning trying to decide between calling a repair tech or troubleshooting my Dometic Brisk Air rooftop AC myself since it's showing weird operational issues. The compressor engages and fan motor operates normally, but the unit fails to produce cold air output. Temperature differential across the evaporator coil is minimal.

Unit functioned properly through previous cooling season with no apparent issues. Current symptoms include normal airflow volume but inadequate cooling capacity. What systematic diagnostic procedure should I follow to identify the root cause? Looking for a methodical troubleshooting sequence that addresses the most probable failure points in order of likelihood. …more

Read answer

Engine Easy 15 minutes 105 👍 0

5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide

Planning to tune my 2018 Ford 6.8L V10 RV but got quoted $800 for professional tuning and wondering if the 5 Star X4 is DIY-friendly. Specifically want to know about real-world performance improvements - does it actually improve throttle response and shift points? What about fuel economy gains?

Which of the 3 programs works best for RV towing? Is the investment worth it for better drivability or just hype? …more

Read answer

Engine Medium 3-4 hours 97 👍 0

Cummins ISL Code 1896: EGR Valve Controller Gaskets & Repair

About to drop $2,800 on my Cummins ISL throwing code 1896 for EGR valve controller out of calibration and wondering if I can tackle this myself. Planning to pull and clean the EGR valve controller to see if that clears it up.

Do I need to order replacement gaskets before I start this job? Want to make sure I have everything on hand before I tear into it. …more

Read answer

Engine Medium Varies by issue 94 👍 0

Onan Generator Fault Codes: Complete Troubleshooting Guide for RV Owners

During my latest camping trip my Onan generator threw a fault code — got my multimeter ready and just need to figure out which diagnostic approach will crack this thing.

I'm seeing 12 or 13 blinks on my generator error display and want to understand what these codes might mean. Are these codes consistent across different Onan models? I'm hoping it's a minor issue and not something requiring a major repair.

Can anyone help me decode what these blinking fault codes typically indicate? …more

Read answer

Engine Medium 1-2 hours 94 👍 0

Ford F53 V10 Bypass Oil Filter Installation: Best Mounting Locations for RV Chassis

Walked out to check my oil analysis results and they're showing 15-micron contaminants, but everything says my 2003 F53 V10's factory filter catches down to 25 microns. I've been reading about how these can help extend oil life and keep things cleaner, but I'm honestly not sure where the best place to mount one would be.

I've seen some people mention sandwich adapters at the original filter location, remote mounting blocks, and even tapping directly into the engine block. As someone who's still learning, I don't want to mess this up or create problems down the road. What's considered the best practice for mounting location on the F53 V10? I'd really appreciate some guidance from those who have done this before. …more

Read answer

Product Ranking 8 compared

Best RV Leveling Blocks & Jacks

4.6 (9,800 reviews)

Engine Easy 15 minutes 94 👍 0

Ford 7.3 Godzilla Oil Pressure: Normal PSI Readings & Troubleshooting

My Ford 7.3 Godzilla is throwing weird oil pressure PSI readings and the shop wants $800 to fix it – can I troubleshoot this myself first? I finally installed a Glowshift electronic oil pressure gauge because I kept hearing horror stories about these engines running dangerously low oil pressure.

Here's what I'm seeing: Cold starts jump over 60 PSI, then drop to 28-30 PSI at 1200 RPM. Once fully warmed up, I'm getting 18-20 PSI at 600 RPM idle, and the pressure stays around 28-30 PSI in my typical 2200 RPM cruising range. It doesn't climb above 30 PSI until I hit 3000 RPM, where it jumps to about 40 PSI.

I know Ford has had issues with some of these engines showing scary low numbers like 8 PSI at idle, so I'm grateful mine isn't that bad. But are these readings actually normal for the 7.3 Godzilla under normal operating conditions? I haven't done any loaded driving tests yet, but I'm trying to figure out if I should be concerned or if this is just how these engines run. …more

Read answer

Engine Easy 30 minutes 91 👍 0

Best Oil Filter for Ford V10 RV Engine - Complete Guide

After walking out to my RV this morning, I spotted my Ford V10's oil filter looking suspiciously ready for replacement, but I'm completely lost on which one won't break the bank. I keep hearing conflicting advice about which oil filter to run.

Everyone seems to swear by different brands - some say Wix 51348 is the sweet spot, others mention NAPA Gold 1348 (are these the same thing?), and then there's the Mobil 1 M1-210A crowd. At Rock Auto, I noticed Fram filters like TG2 ($6.43), XG2 ($9.50), and HP16 ($12.82), plus a Mobil 1 M1210A at $8.14.

What's the real deal here? Is there actually a 'best' filter for the V10, or am I overthinking this whole thing? I'm also considering adding a bypass oil filter. I just want something reliable that won't break the bank every oil change, especially since this rig sees a lot of highway miles. Is a $23 Amsoil filter really worth three times the price of a Wix? Any recommendations from fellow V10 survivors? …more

Read answer

Engine Medium 2 hours 90 👍 0

Onan 5500 Generator Tune-Up Guide: Best Aftermarket Parts & Filters 20

Before my last camping trip when I tried to order replacement parts, I discovered that finding genuine OEM components for my Onan 5500 generator has become nearly impossible. The Cummins website has been showing most tune-up components as out of stock for months now, and when I do find supposedly "official" Onan oil filters online, many retailers are substituting generic filters that may not meet the same specifications.

I've been researching alternatives and I'm particularly concerned about getting the right oil filter and spark plugs. For the oil filter, I've seen conflicting information about whether aftermarket options like Wix filters are truly compatible - some sources mention the 57398 but I've read mixed reviews about fitment issues. For spark plugs, my current ones are NGK BPR4EY, and I've heard the NGK 3432 might be equivalent, but I want to make sure before ordering.

I'm also planning to stick with zinc-containing oil like Rotella T6 15w40 since I know air-cooled engines need the extra protection, but I'd love confirmation that I'm on the right track with quality aftermarket parts that won't compromise my generator's performance. What specific part numbers and brands would you recommend for a reliable tune-up when OEM parts aren't available? …more

Read answer

Engine Medium 2-4 hours for custom fabrication 87 👍 0

F53 V10 Water Ingestion Fix When Ford Parts Discontinued

Our '99 F53 chassis with the V10 engine hasn't run right ever since we got caught in that torrential downpour last month and now we're dealing with water ingestion issues. I've experienced hydro-lock issues in severe downpours, and I know Ford issued Technical Service Bulletin 04-24-22 specifically addressing this air intake design flaw on the '99 to '04 F53 models. The TSB called for replacing the air intake horn and modifying the intake strap to prevent water from being sucked into the engine during heavy rain conditions.

The problem is that when I contacted my Ford dealer, they told me the critical air intake horn part specified in TSB 04-24-22 has been discontinued and is no longer available. The modified strap is still available, but without the new intake horn design, I'm still vulnerable to water ingestion during storms. With extensive travel plans ahead where I'll likely encounter severe weather, I need a reliable solution to protect my engine from hydro-lock.

What are my options for addressing the F53 V10 water ingestion problem when the original Ford TSB parts are no longer available? Are there aftermarket solutions or modifications that other F53 owners have successfully implemented to solve this issue? …more

Read answer

Loading more Q&A...

You've seen all 56 Q&A articles!