Results for "mounting bracket"

Appliances Hard Professional repair required 1,044 👍 0

Splendide WDC7100XC Drum Bearing Repair & Replacement Guide

Splendide combo washer-dryer started making a grinding noise during the spin cycle and now it vibrates so hard it walks across the floor. Pretty sure it's the drum bearings based on the sound. Debating between a $400 repair bill and just replacing the whole unit. …more

Read answer

Exterior Hard 2-8 hours for temporary fix, 1-5 days for permanen 409 👍 1

RV Sidewall Blistering & Delamination Repair Guide

According to three different RV shops, fixing my bubbling sidewall delamination will cost thousands, but I'm wondering if tackling this DIY repair myself is actually feasible. My 2004 Itasca Sunova has decided to sprout some lovely blisters on the right sidewall - two beauties that are about 12-14 inches long and 3-4 inches wide, running vertically right behind the awning arm. Perfect timing since we're currently on the road living our best RV life!

I'm pretty sure water snuck in somewhere (probably from the roof rail or that shower skylight we never use), and now my RV looks like it's got chicken pox. Since we can't exactly pull into the nearest RV surgeon's office, I need to know: what can I do right now to stop this from getting worse, and what's involved in actually fixing this mess properly? I'm hoping there's some kind of emergency containment plan that doesn't involve duct tape and prayers! …more

Read answer

Propane Hard 6-8 hours 399 👍 0

Atwood GC10A-4E Replacement: Best Tankless RV Heaters

Halfway through draining my Atwood GC10A-4E's supposed 10-gallon capacity, the water's already running cold but my gauge shows I've only pulled maybe 6 gallons. Are there any dual-fuel tankless units that would work as a replacement? I know there's no plug-and-play option, but what are the best tankless water heaters that offer both gas and electric operation for RVs? …more

Read answer

Product Ranking 8 compared

Best RV Generators

4.6 (18,900 reviews)

General Hard 45-60 min 357 👍 0

How to Remove Firefly RV Control Panel: Complete DIY Guide

Our 2019 Fleetwood Discovery LXE has a malfunctioning Firefly multiplex control panel that needs to be completely removed. I've been putting this off for months because I keep hearing horror stories about people cracking their panels or damaging the surrounding woodwork during removal.

I need to access the back of the unit for some electrical work, but I'm honestly terrified of breaking something expensive. The panel seems to be mounted flush with no obvious screws or clips visible from the front. I've searched everywhere but can't find a complete walkthrough that covers the preparation, actual removal process, and how to get everything back together properly.

Can someone please provide a detailed DIY guide that covers all the steps? I'm willing to take my time and do this right - I just need to know the proper technique so I don't end up with a broken control panel or damaged wall. …more

Read answer

Exterior Medium 2-3 hours 313 👍 1

How to Replace RV Slide Topper Fabric: Complete DIY Guide

I pulled into three different campsites this month and my torn slide topper is eating through my gear faster than I can replace it. I've never done anything like this before and I'm worried I might damage the whole mechanism or make things worse.

Can I actually replace just the fabric portion safely, or should I bite the bullet and have the entire assembly replaced by a professional? I'm also concerned about costs - I'm hoping this won't break the bank. If it is something I can do myself, how difficult is it really? I don't want to get in over my head and end up with a bigger problem than I started with.

Can you help me understand the best approach for my specific situation? …more

Read answer

Plumbing Medium 1-2 hours 302 👍 0

RV Tank Sensor Removal Guide: Gray & Black Water Tank Sensors (Step-by-Step Process)

Somewhere between throwing $150 at new RV tank sensors and just ripping out these faulty gray and black water sensors completely, I'm wondering which route makes more sense? Was looking at changing my gray/black water tank sensors, but when I crawled under there, this is what I found. What kind of sensors are these and how do you remove them? I'd really appreciate some specific advice about the sensor type and removal technique. …more

Read answer

Propane Medium 45 minutes 301 👍 0

RV Gas Detector Beeps Every Minute at Night - How to Fix

Before my wife mentioned it, I had no idea our RV gas detector was beeping every single minute from 7PM to 7AM—now it's driving me absolutely crazy. It only does this during nighttime hours - never during the day. I'm plugged into shore power with 4 batteries (2 coach, 2 engine). What would cause this specific timing pattern? Is it actually detecting gas or is something else going on with the detector itself? …more

Read answer

Exterior Medium 30-60 min 287 👍 1

Kwikee RV Steps Not Working? Complete Troubleshooting Guide

Apparently we're leaving for a three-week cross-country trip next Monday and my Kwikee electric RV steps are still having intermittent retraction issues even after replacing both the gear box and motor. My steps are exhibiting intermittent retraction issues - they extend normally but require manual assistance to retract fully, stopping approximately a quarter inch through the cycle without intervention. I've already installed a new gear box and motor, yet the problem persists.

What systematic diagnostic approach should I follow to identify the root cause? I need to understand the complete troubleshooting sequence for motor functionality, electrical switch operation, and mechanical linkage components. Are there specific voltage measurements, resistance checks, or mechanical adjustments that should be performed to isolate whether this is an electrical or mechanical failure?

Thanks,
Pete …more

Read answer

Exterior Hard Varies 282 👍 0

Carefree RV Awning Spring and Arm Replacement Guide - Model Compatibility Tips

According to my mechanic, fixing my 18-foot Carefree of Colorado awning's busted spring mechanism will cost $800, but I'm wondering if I can tackle this myself since there's zero tension left. Along with that, one of the support arms that helps transition the awning from travel position to deployed position is also damaged and needs replacement.

Before I start ordering parts or calling repair shops, I'm trying to understand how Carefree's replacement parts work. Are their springs and support arms universal components that work across different awning sizes and models, or does Carefree use proprietary parts that are specific to each awning series? I've been browsing their website but the parts compatibility information isn't very clear about what fits what.

I'd really appreciate any guidance on part compatibility and whether this is something I should tackle myself or leave to a professional. The spring replacement in particular seems like it might be tricky given the tension involved. …more

Read answer

Solar Batteries Medium 2-3 hours 273 👍 0

RV Solar Panel Z Bracket Installation: Drill vs Adhesive Mounting Guide

Ready to mount solar panels on the roof but torn between drilling through the fiberglass with Z-brackets or using VHB tape adhesive mounts. Terrified of roof leaks from drill holes but also worried the adhesive won't hold at highway speeds. Which mounting method actually holds up long term? …more

Read answer

Ac Refrigeration Medium 4-6 hours 272 👍 0

RV 3-Way to 12V Compressor Fridge Replacement: Cut Power Use 80%

Three weeks into owning this RV and the previous owner left me with a power-hungry Norcold 3-way absorption fridge that's absolutely demolishing my 600AH battery bank daily.

I keep hearing people rave about switching to 12V compressor fridges like the Dometic DMC4101, claiming they'll solve all my power woes. But here's the thing - everyone says "it uses way less power" but nobody gives me actual numbers! I need the cold hard facts: exactly how much power will I save making this switch? Will it really make that big of a difference, or am I just trading one expensive problem for another?

Please tell me someone has real-world experience with the power consumption difference between these fridge types! …more

Read answer

Product Ranking 8 compared

Best RV Propane Accessories

4.5 (11,200 reviews)

Propane Medium 30-60 minutes 267 👍 1

Atwood AFMD35 Furnace Playing Peek-a-Boo - How to Clean Flame Sensor & Fix Short Cycling

Staring at my Atwood AFMD35 manual that claims it should stay running once lit, but mine keeps shutting off every few minutes like it's playing peek-a-boo. It fires up beautifully for about 5-10 seconds, gets my hopes up that I won't freeze tonight, then promptly shuts off like it's having second thoughts about this whole "heating the RV" thing.

I've ruled out the sail switch and high temp limit since it actually lights (small victories in RV life, right?). I'm pretty sure the flame sensor is the culprit here, but I've never cleaned one before. How do I clean this mysterious little part, and what's the best way to access it on this model? Because apparently my furnace thinks playing hard-to-get is charming! …more

Read answer

Engine Hard 4-6 hours installation 259 👍 0

SDI E-Clik vs Liquid Spring: Affordable F53 Chassis Suspension Upgrade Options

Nobody warned me that what started as minor swaying on highway trips last month would turn into white-knuckle driving every time I take my F53 chassis RV over 50mph. SDI E-Clik costs about a third of what Liquid Spring systems run, but I'm wondering what you actually get for that price difference.

Is E-Clik just electronic shock control, or does it offer more comprehensive suspension improvements? How does the ride quality compare between the two systems on F53 motorhomes? …more

Read answer

Slideouts Medium 4-6 hours 253 👍 0

How to Replace Atwood Levelegs Control System with GAMA Electronics RF340-4PR Controller

Noticed my Tiffin Allegro Bay's Atwood Levelegs control pad has a completely blank display, won't respond to any commands, AND all the leveling jacks are totally dead. I'm looking at expensive repair options - around $400 for repair service or $3000+ for a complete Bigfoot replacement system.

I researched alternatives and found the GAMA Electronics RF340-4PR-ASL controller with HP4PR-ASL handheld pendant, which cost around $235 shipped. I customized the solution by 3D printing a switch panel with 4 DPST on/off switches and a momentary DPDT switch for jack control.

Is this type of aftermarket replacement reliable and compatible with existing Atwood jacks and wiring? I want something I can easily troubleshoot and maintain. …more

Read answer

Chassis Medium 45 minutes 242 👍 0

Dutchstar Chassis Cracking Noise: Diagnosis & Repair Guide

Hearing a loud cracking or popping noise from underneath my Dutchstar when going over bumps or turning. Sounds structural — like metal flexing or a weld breaking. Crawled under and couldn't see any obvious cracks but the noise is getting louder each trip. …more

Read answer

Loading more Q&A...

You've seen all 118 Q&A articles!