Popular New Guides Product Guides Tools Checklists My Rig

Results for "conversion"

783+ Q&A Updated Weekly Free
Ford V10 Turbo Kit for Motorhomes: Cost, Risks & Better Alternatives
Engine Hard Not recommended 159 👍

Ford V10 Turbo Kit for Motorhomes: Cost, Risks & Better Alternatives

Before every camping season rolls around, I face the same dreaded reality with my Ford V10 motorhome crawling up mountain passes like a wounded turtle. What are the realistic costs involved? Are there major risks to the engine I should know about? Is this actually worth doing or should I look at other options? …more
Atwood GC10A-4E Replacement: Best Tankless RV Water Heater Upgrades 20
Propane Hard 6-8 hours 149 👍

Atwood GC10A-4E Replacement: Best Tankless RV Water Heater Upgrades 20

Halfway through draining my Atwood GC10A-4E's supposed 10-gallon capacity, the water's already running cold but my gauge shows I've only pulled maybe 6 gallons. Are there any dual-fuel tankless units that would work as a replacement? I know there's no plug-and-play option, but what are the best tankless water heaters that offer both gas and electric operation for RVs? …more
How to Upgrade Progressive Dynamics Converter for Lithium RV Batteries Safely
Solar Batteries Medium 2-4 hours 127 👍

How to Upgrade Progressive Dynamics Converter for Lithium RV Batteries Safely

Got a 15-year-old Progressive Dynamics converter that's starting to throw fault codes with my new lithium setup — worth upgrading or try making it work? I have a 2006 Lance 915 cabover that I recently upgraded with 2-200 watt Bouge solar panels and 2-100ah SOK lithium batteries.

The problem is I'm still running the original Progressive Dynamics converter charger that came with the RV, and I've learned it's not designed for lithium batteries. I'm worried about damaging my new battery investment.

What are my options for upgrading? I'm not sure if I need to replace the whole converter unit or if there's some kind of upgrade kit available. Any advice would be really appreciated since I don't want to mess this up! …more
Entegra Odyssey 26M Murphy Bed Couch Replacement and Ground Clearance Upgrade
Appliances Hard 8-16 hours 113 👍

Entegra Odyssey 26M Murphy Bed Couch Replacement and Ground Clearance Upgrade

Our 2022 Entegra Odyssey 26M's Murphy bed couch just completely failed at 11 PM and we desperately need a replacement solution before family arrives tomorrow morning. What if I could swap out that murphy bed couch for some fancy theater seats? I'm picturing myself reclining in luxury while Netflix loads at dial-up speeds thanks to campground wifi.

But here's where my engineering expertise (aka zero knowledge) kicks in - can theater seats even work with a murphy bed setup? Do the backs need to come off or fold down? And while I'm dreaming big, I'd also love to get a couple more inches of ground clearance so I stop scraping on every driveway entrance like I'm driving a lowrider.

Am I asking for the impossible, or is there actually a way to make this couch-to-theater-seat transformation happen? And what's the least complicated way to get this thing sitting a bit higher off the ground? …more
How to Upgrade Your RV Converter Charger for Lithium Batteries with Gentle Care
Solar Batteries Medium 2-4 hours 113 👍

How to Upgrade Your RV Converter Charger for Lithium Batteries with Gentle Care

Halfway through planning our three-week cross-country trip next month, I realized my PD4560 60-amp converter/charger won't properly handle the lithium batteries I'm installing. My existing Progressive Dynamics unit obviously isn't designed for LiFePO4 batteries - I can use boost mode to charge them up, but I know that's not ideal for battery longevity.

I just purchased a 30 amp generator and I'm wondering if it will have enough capacity to handle not just my current charger, but potentially a larger lithium-compatible unit. I'm considering upgrading to a 75 or even 90 amp charger to reduce charging times, but I need to make sure my generator can handle the load. I'm trying to figure out the actual AC amp draw of these higher-capacity chargers and whether my 30 amp generator will be sufficient.

What are the best lithium-compatible converter/charger options that would work with my generator setup, and how do I properly size the charger capacity to match my lithium battery bank? …more
Prevost vs Newell vs Foretravel vs King Aire: Which to Buy?
General Medium Research and decision process: 2-4 weeks 112 👍

Prevost vs Newell vs Foretravel vs King Aire: Which to Buy?

My wife and I are drowning in luxury coach research with our $500k-$1M budget and honestly have zero clue what separates Prevost, Newell, Foretravel, and King Aire for full-time living. Primary evaluation criteria include depreciation mitigation over 2-3 year ownership cycle and maintenance reliability metrics.

Specific units under consideration: 2017 Prevost Emerald at $850k with 60k miles, and 2016 Foretravel Realm K3 with low miles at approximately $400k. Also exploring 2021 King Aire and Newell models.

Seeking technical assessment comparing driving performance, interior quality, and reliability across Prevost, Foretravel K3/K4, Newell, and King Aire models. Concerned about potential maintenance requirements on older coaches, preferring newer models with resolved initial manufacturing issues.

Require detailed insights into value retention projections, drivetrain performance, and long-term operational dependability for these luxury coach manufacturers and specific model years. …more

Still stuck on this repair?

Get a personalized answer from a verified RV mechanic. Describe your issue and get step-by-step help.

Chat with an RV Mechanic
27708 RV owners helped · Avg response under 5 min
Fleetwood Excursion Tire Upgrade Guide: 255 to 275 Width Conversion
Engine Medium 1 hour research 110 👍

Fleetwood Excursion Tire Upgrade Guide: 255 to 275 Width Conversion

After upgrading my 2015 Fleetwood Excursion M-35B from 255 to 275 width tires, it started getting sketchy handling on highway turns. The current 255/70R22.5 tires are wearing out and I'd love to go wider with 275/70R22.5 for better stability, but I keep getting conflicting advice from different tire shops.

Some say it's fine, others warn about clearance issues and potential problems. I really need to know what specific measurements I should check before making this change. What wheel width do I need? How do I verify there's enough steering clearance? I don't want to buy expensive tires only to find out they don't fit properly or aren't safe for my RV's load requirements. …more
Independent Super C Motorhome Manufacturers: Complete Guide to Non-Thor Builders
General Easy N/A - shopping 105 👍

Independent Super C Motorhome Manufacturers: Complete Guide to Non-Thor Builders

Three months of shopping and my wife just pointed out every Super C we're considering comes from Thor subsidiaries, making me realize consolidation might be trapping us with limited service options. It seems like Thor Industries and Berkshire Hathaway own practically every major motorhome brand out there now.

Before I make what could be a costly mistake, I need to know - are there actually any independent Super C manufacturers left that aren't owned by these corporate giants? I'm cautious about putting all my eggs in one basket with these mega-corporations. Should I even care about the ownership structure, or am I overthinking this? I just want to make sure I have options and aren't setting myself up for problems down the road. …more
How to Protect Your RV Alternator When Charging Lithium Batteries: DC-
Electrical Medium 2-4 hours 105 👍

How to Protect Your RV Alternator When Charging Lithium Batteries: DC-

Tried everything my neighbor did to charge his LiFePO4 batteries but mine keeps frying the alternator while his works flawlessly — what's different? I want to install a temperature sensing device that can interrupt charging by opening the solenoid between chassis and house charging systems if the alternator gets too hot. I'm looking to spec out components and understand the installation process, and I'm open to hearing why this might not be a good approach. My goal is preventing alternator overheating when these lithium batteries draw high current compared to my old flooded or AGM batteries. I'm looking for technical feedback and am totally open to critique. …more
How to Replace Atwood Levelegs Control System with GAMA Electronics RF340-4PR Controller
Slideouts Medium 4-6 hours 104 👍

How to Replace Atwood Levelegs Control System with GAMA Electronics RF340-4PR Controller

Noticed my Tiffin Allegro Bay's Atwood Levelegs control pad has a completely blank display, won't respond to any commands, AND all the leveling jacks are totally dead. I'm looking at expensive repair options - around $400 for repair service or $3000+ for a complete Bigfoot replacement system.

I researched alternatives and found the GAMA Electronics RF340-4PR-ASL controller with HP4PR-ASL handheld pendant, which cost around $235 shipped. I customized the solution by 3D printing a switch panel with 4 DPST on/off switches and a momentary DPDT switch for jack control.

Is this type of aftermarket replacement reliable and compatible with existing Atwood jacks and wiring? I want something I can easily troubleshoot and maintain. …more
Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point
Engine Medium 2-3 hours 101 👍

Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point

Every Ford E450 I've worked on had the inertia switch behind the driver's panel — but my 2011 Freedom Elite 32r has it hidden somewhere completely different. The engine is experiencing what appears to be fuel delivery issues after a minor fender bender, and I suspect the inertia switch may have been triggered and needs to be reset.

I've already done extensive searching in the typical locations - removed both driver and passenger side kick panels completely, pulled out the glove box, and even partially disassembled sections of the dashboard. Despite checking all these common spots where Ford usually places these switches, I'm coming up empty-handed.

Could the switch be integrated into another component on this particular year and model? Are there any alternative locations specific to the E450 chassis or Freedom Elite configuration that I should be checking? I'm also wondering if some models of this year might not have a traditional standalone inertia switch at all. …more
Mercedes Sprinter RV Extended Warranty: Worth the Cost in 2024?
Engine Easy N/A - informational 92 👍

Mercedes Sprinter RV Extended Warranty: Worth the Cost in 2024?

Walked into the dealership at closing time with my 2022 Thor Quantum MB24 and they're pressuring me to decide on extended warranty coverage before they open tomorrow. The original Mercedes chassis warranty has already expired since it was put in service in 2021, and the dealer is pushing a 4-year/60,000 mile extended warranty.

I keep hearing that Mercedes Sprinter repairs can be really expensive, but I honestly don't know what to expect or what questions I should even be asking about the warranty coverage. Are there specific things I should make sure are covered? What kind of repair costs are we actually talking about with these Sprinter RVs?

I'd really appreciate any guidance from folks who've been through this decision before. Thanks for helping a newbie out! …more
Lead Acid vs Lithium RV Batteries: Complete Upgrade Guide
Solar Batteries Medium 4-8 hours 91 👍

Lead Acid vs Lithium RV Batteries: Complete Upgrade Guide

Pulled into my favorite boondocking spot with batteries that used to last three days, but now these lead acid units are completely dead after just one night! I've been running two 12V lead acid batteries in my travel trailer and I'm SO tired of dealing with their limitations - slow charging, constant maintenance, and they seem to die at the worst possible times.

I found these Dyness 12V 100Ah LiFePO4 lithium batteries and I'm really hoping they might be the solution I've been looking for. But I'm completely lost when it comes to lithium technology. Will my current converter/charger work with lithium batteries, or am I looking at more upgrades? I keep seeing mentions of something called a BMS - what exactly does that do and why is it important?

I just want a system that actually works reliably and charges properly both when plugged into shore power and while driving. Can someone please tell me if making the switch to these Dyness LiFePO4 batteries is worth it, and what I need to know about compatibility with my existing charging system? …more

Need a second opinion?

Not sure if this applies to your rig? An RV technician can confirm the fix for your specific make and model.

Ask an RV Expert
27708 RV owners helped · Avg response under 5 min
Complete Newmar RV Lithium Battery Upgrade: DC-DC Charger and BIM Wiring Guide
Solar Batteries Hard 6-8 hours 91 👍

Complete Newmar RV Lithium Battery Upgrade: DC-DC Charger and BIM Wiring Guide

Staring at my 2019 Newmar's freshly wired lithium upgrade with Victron BVM-712, Orion XS DC-DC charger, and Cerbo GX — finished yesterday but the system still isn't charging properly.

The main issue is I can't figure out how to properly integrate my existing boost switch with the new DC-DC charger setup while maintaining the ability to trickle charge chassis batteries. Currently, my Orion XS DC-DC charger flows only one way from engine alternator to lithium batteries. Should I replace the existing BIM with a LI-BIM, which would be in series with the 2/0 cable? Is there a control wire on the Orion XS that will allow flow from lithium to chassis batteries while on shore/inverter power?

I'm considering adding a 120V battery tender for chassis batteries, but want to confirm what modifications might be needed to my existing BIM. Can someone provide guidance on the correct wiring approach? …more
RV PEX Plumbing Fittings Guide: Crimp vs SharkBite vs FIP Connections Explained
Electrical Medium 1-2 hours 89 👍

RV PEX Plumbing Fittings Guide: Crimp vs SharkBite vs FIP Connections Explained

Got what's probably a dumb question, but why do I have like three different types of PEX fittings in my RV and which ones should I actually be using for repairs? The current setup has what I believe are crimp rings on the PEX lines, but I'm seeing different types of fittings available and I'm confused about which approach is best for a DIY repair.

I've been looking at compression fittings, push-to-connect options like SharkBite, and traditional crimp rings, but I'm not sure which system actually works with RV PEX plumbing. Some of my connections are also threaded at the water pump and manifold areas, and I keep seeing references to FIP connections but I'm not entirely clear on what that means in the context of RV plumbing.

What's the difference between these connection types for RV PEX systems, and which option would be easiest for someone doing their own plumbing repairs? I want to make sure I'm using the right fittings and tools before I start tearing into my water system. …more
Robert, RV Mechanic
Ask an RV Mechanic Avg reply < 5 min

My Rig Settings

Hi, I'm Hank!
Need help setting up? I can walk you through it
Rig Info
Give it a name you'll recognize
Power & Electrical
Climate Control
Water System
Refrigerator Type
Leveling System
Convenience & Features
Sync across devices