Results for "battery power"

Ac Refrigeration Medium 2-3 hours 1,845 👍 0

Norcold 1210 Not Cooling: No Error Codes Troubleshooting Guide

During my morning RV check I spotted my Norcold 1210 completely dead with zero cooling that was running perfectly yesterday with no error codes. Unit appears to be operating normally with no error codes displayed, but it's not cooling properly. Interior temperature is staying above 50 degrees. Thermistor has been tested and checks out fine. What else should I look at? …more

Read answer

Engine Easy N/A 976 👍 0

Ford V10 Triton Engine Maintenance Guide: EGR Delete vs Regular Service Tips

Spent years doing regular EGR maintenance on my old gas motorhome without issues — but this 2007 Fleetwood 31' Tioga with Ford V10 Triton has me second-guessing everything. I keep reading conflicting information about EGR delete procedures on V10 engines, and I'm worried I might make things worse if I mess with it.

Is the EGR delete modification actually necessary on this 2007 3-valve V10, or am I overthinking this? I don't want to void any warranties or create problems that weren't there before. Would I be better off just sticking to regular maintenance instead of modifications? I'm looking for reassurance that I'm taking the right approach to keep this engine running reliably for years to come. …more

Read answer

Electrical Medium 2-4 hours 743 👍 0

RV Chassis Battery Draining & Dead Outlets - Troubleshooting

Finally followed the manual's advice to check the converter first when my outlets died, but my RV chassis battery keeps draining even though the converter tests perfectly. here and I'm at my wit's end with my 2018 Winnebago Vista. The chassis battery keeps going completely dead every few days, even when we're plugged into shore power at the campground. I've already replaced the battery twice thinking it was just old, checked all the obvious stuff like dome lights and radio, and even had the alternator tested - everything checks out fine.

What's really driving me crazy is that this just started happening about a month ago out of nowhere. We've been full-timing for three years without any major electrical issues. I'm wondering if there's some parasitic draw I'm missing or if the battery isolator could be acting up? Has anyone else dealt with this nightmare? I'm getting tired of jump-starting this thing every other day and my wife is about ready to sell the rig and get a travel trailer instead! …more

Read answer

Product Ranking 8 compared

Best RV Generators

4.6 (18,900 reviews)

Engine Medium 2-3 hours 710 👍 0

Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point

Every Ford E450 I've worked on had the inertia switch behind the driver's panel — but my 2011 Freedom Elite 32r has it hidden somewhere completely different. The engine is experiencing what appears to be fuel delivery issues after a minor fender bender, and I suspect the inertia switch may have been triggered and needs to be reset.

I've already done extensive searching in the typical locations - removed both driver and passenger side kick panels completely, pulled out the glove box, and even partially disassembled sections of the dashboard. Despite checking all these common spots where Ford usually places these switches, I'm coming up empty-handed.

Could the switch be integrated into another component on this particular year and model? Are there any alternative locations specific to the E450 chassis or Freedom Elite configuration that I should be checking? I'm also wondering if some models of this year might not have a traditional standalone inertia switch at all. …more

Read answer

Electrical Medium 45 minutes 666 👍 0

RV Backup Camera Not Working? Complete Troubleshooting Guide

Spent all winter enjoying a perfectly working RV backup camera, but the second temperatures hit 85 degrees outside, my screen goes completely black. My wireless backup camera decided to give me the silent treatment right when I need it most. The monitor is just sitting there mocking me with a "no signal" message, and honestly, my spatial awareness isn't what it used to be.

The camera worked fine on our last camping trip (when I only needed to back up twice), but now that I'm trying to navigate tight campground spots, it's gone completely dark. I'm dealing with a wireless system, so I know there are more things that can go wrong than with a wired setup.

Before I resort to using my spouse as a very expensive parking sensor, what's the best way to troubleshoot this? I'm hoping it's something simple like a loose connection rather than having to explain to my insurance company why there's a picnic table embedded in my bumper. …more

Read answer

Solar Batteries Medium 4-6 hours 561 👍 0

Georgetown GT7 Lithium Battery Conversion: Complete RV Installation Guide

Turned the keys on my 2023 Georgetown GT7 and discovered the previous owner left the electrical system in complete shambles, now facing this intimidating lithium conversion nightmare. I know I need LiFePO4 batteries, but every forum post I read mentions different components and I'm getting conflicting information.

I really want to make this upgrade work - the lead acid batteries are killing me with their weight and charging limitations. What specific components do I need beyond the actual lithium batteries? I'm especially confused about whether my converter will work and if I need additional charging equipment for the alternator. Please tell me my 2023 model year gives me some advantage here! …more

Read answer

Engine Hard 4-6 hours 425 👍 0

Ford F53 7.5L RV Won't Start: Fuel Pump Relay Voltage Drop Fix

Woke up to my 1996 Ford F53 7.5L motorhome eating through my patience and wallet with this no-start issue that keeps coming back. It cranks strong but absolutely will not start, and I've been chasing this problem for weeks now. The engine ran fine for about 3-4 minutes one day, then just died and hasn't started since.

I've already done quite a bit of diagnostic work:
- Replaced PCM and distributor
- Fuel pump works when powered directly
- Battery is fully charged
- Checked fuses and relays
- PCM relay voltage drops from 12.2V to 9.3V with key on
- Fuel pump relay only shows 3.3V at pin 86 (should be 12V)
- Inertia switch tested at 1.7V at connector
- ANL 178 fusible link fluctuates between 0.3-0.6V

The engine will only start with starter fluid when the SPOUT is removed. I'm getting only 5.5V at the fuel pump connector.

Has anyone dealt with this specific issue on an F53 chassis? I really need to get this RV back on the road and I'm running out of ideas! …more

Read answer

Ac Refrigeration Medium 45 minutes 419 👍 0

Dometic 12V Refrigerator Not Cooling on Battery Power - Complete Troubleshooting Guide

Staring at my Dometic DMC compressor refrigerator that runs perfectly on 12V DC when it's cool but stops cooling completely once temperatures hit 85°F or higher. The unit works perfectly when I'm plugged into shore power at campgrounds - everything stays cold and the freezer compartment keeps items frozen solid. However, when I'm boondocking and running solely on my RV's battery bank, the performance drops significantly. The refrigerator struggles to maintain proper temperatures, and the freezer can't keep things frozen.

I have a relatively new battery setup with what should be adequate capacity for my power needs. The batteries test fine with a multimeter when the refrigerator isn't running, but I'm wondering if there's something I'm missing about power requirements or electrical connections. I've heard that 12V compressor refrigerators can be pretty demanding on battery systems, but I'm not sure what specific issues to look for.

What are the most common causes when a 12V Dometic compressor refrigerator works fine on shore power but fails to cool properly when running on batteries? I want to troubleshoot this systematically before calling in a technician. …more

Read answer

Solar Batteries Medium 4-6 hours for inverter replacement 414 👍 1

RV Inverter Guide: Modified vs Pure Sine Wave - Safe Power

My multimeter's out and I'm ready to tackle this RV electrical mess myself — pretty sure the inverter's the culprit but need to know where to start. I have a 2000 Winnebago Ultimate Advantage with four deep cycle house batteries and recently installed a Xantrex 758 inverter to replace my old Freedom 15 unit. The first time I tried using the inverter power while unplugged from shore power, something very strange happened - a hair dryer in the bathroom started running by itself and wouldn't shut off when I tried the switch. I had to unplug it, and the handle was warm. The hair dryer appears to be ruined now.

When I bought the Xantrex 758, I paid around $725 for what I thought was a good unit, but I'm now learning there's a difference between modified sine wave and pure sine wave inverters. I wasn't aware of this distinction when I made the purchase, and it turns out the 758 is a modified sine wave unit. I've since heard that modern electronics, especially things like residential refrigerators, computers, and sensitive electronic components, can be damaged by modified sine wave power.

I'm really concerned about potentially damaging my new residential refrigerator, stereo system, and computer equipment. Should I be worried about using this modified sine wave inverter with modern RV electronics? Is the hair dryer incident a sign that I need to upgrade to a pure sine wave unit, or are there other factors that could have caused this problem? I'm trying to understand if my current setup is putting my expensive electronics at risk. …more

Read answer

Engine Medium 2-4 hours 375 👍 0

Generac 7.5kW Diesel Generator Repair Guide - RV Troubleshooting

Planning to ignore the weird noises from our Generac 7.5kW diesel generator backfired when my wife pointed out I definitely made things worse during my repair attempt. I have a 2007 Monaco with a Generac 7.5kW diesel generator, and yesterday when I tried starting it, the battery was really weak. I probably held the starter button too long - maybe 15 seconds or so - because it was cranking so slowly and I kept hoping it would catch.

Now when I try to start it, I just get a single click and nothing happens. I'm worried I damaged something by cranking it so long with that weak battery. Should I be looking at the starter solenoid or starter motor? Is there anything I can check myself before I have to take it to a repair shop? I'd really appreciate any guidance on troubleshooting this. …more

Read answer

Electrical Medium 2-6 hours 366 👍 1

ECM Low Battery Warning RV: Complete Diagnosis & Fix Guide

During a family trip, my 2005 Fleetwood Discovery 39S threw code 168-1 for low ECM battery voltage and went into full shutdown mode—is this dangerous with kids onboard? Engine cut out, transmission selector went dark, ABS warnings everywhere - the whole nine yards. Scared the heck out of me when it happened on the interstate!

I'm seeing this seems to be a thing with these diesel pushers, but I'm drowning in conflicting info online. Some say it's the chassis battery, others blame alternator issues, and I've even seen posts about ECM power supply problems on the Caterpillar engines. What's the actual step-by-step process to track this down? And more importantly, how do I fix it so it doesn't leave me stranded again? Really need a complete walkthrough of what causes this code and the proper repair approach. …more

Read answer

Product Ranking 8 compared

Best RV Sewer Hoses & Kits

4.6 (31,500 reviews)

Solar Batteries Medium 2-4 hours 297 👍 0

RC7-GS Inverter AGM Battery Settings: Complete Setup Guide

Replaced my 105Ah AGM battery and now my RC7-GS inverter charger is completely rejecting it like this capacity doesn't exist in its programming.

The charging settings only go from 125Ah up to 1000Ah, with an 'auto' option that supposedly 'learns' my battery but resets every time the low voltage cutoff trips (which feels like cheating, honestly). I'm worried about undercharging or cooking my expensive new AGMs if I pick the wrong setting.

Oh, and while we're talking about things that don't work as advertised - the generator auto-start feature might as well be a myth. Can't even manually start the generator from the RC7 panel. At this point I'm wondering if I should have just stuck with my old setup that actually worked! Anyone know what I'm doing wrong here? …more

Read answer

Electrical Medium 2-4 hours 257 👍 0

Protect Your RV Alternator When Charging Lithium

Tried everything my neighbor did to charge his LiFePO4 batteries but mine keeps frying the alternator while his works flawlessly — what's different? I want to install a temperature sensing device that can interrupt charging by opening the solenoid between chassis and house charging systems if the alternator gets too hot. I'm looking to spec out components and understand the installation process, and I'm open to hearing why this might not be a good approach. My goal is preventing alternator overheating when these lithium batteries draw high current compared to my old flooded or AGM batteries. I'm looking for technical feedback and am totally open to critique. …more

Read answer

Electrical Medium 30-90 min 243 👍 0

No 12 Volt Power in RV: Complete Troubleshooting Guide

Turned the key and nothing works on 12 volt — no lights, no water pump, no slides. Batteries show 12.6 volts on the multimeter so they're fully charged. House batteries seem fine but zero power is getting to any of the 12V circuits inside the coach. …more

Read answer

Solar Batteries Medium 2-4 hours 236 👍 0

RV Battery Draining Overnight? Find & Fix Parasitic Drain

The day after I installed that new solar charge controller last month, my RV batteries started mysteriously draining from fully charged to completely dead overnight. I've already confirmed that all visible lights, fans, and appliances are turned off, and I've switched off the main interior power, but something is still drawing power continuously. I understand this is likely a parasitic drain where some component or circuit is staying energized when it shouldn't be, but I'm not sure how to systematically track down which specific circuit is causing the problem. I have a basic multimeter but I'm not entirely sure about the proper methodology for testing each circuit individually to isolate where exactly the power draw is coming from. What's the step-by-step process for using a multimeter to methodically work through the electrical system, starting from the main disconnect and testing individual fuses or circuits until I can pinpoint the exact source of this parasitic drain? …more

Read answer

Loading more Q&A...

You've seen all 252 Q&A articles!