Popular New Guides Product Guides Tools Checklists My Rig

Results for "VIN"

783+ Q&A Updated Weekly Free
RV Water Pump Losing Prime: Troubleshooting & Winterization
Plumbing Medium 2-4 hours 446 👍 9

RV Water Pump Losing Prime: Troubleshooting & Winterization

Got a 2022 Tiffin Open Road 34PA with a water pump that keeps losing prime during winterization — about to buy a replacement but wondering if I'm throwing money at the wrong problem? I can get it back by quickly opening and closing one of the lowest drain valves, but then it just loses prime again after a while. This has happened on other RVs I've winterized too, but it's particularly stubborn on this Tiffin.

I'm suspecting it might be the inline check valve next to the pump or maybe the one behind the Truma hot water heater, but I'd love some guidance on proper diagnosis. What are the most common causes of prime loss during winterization, and what's the best way to troubleshoot and fix this? I want to make sure I'm covering all my bases for winter storage prep. …more
Monaco Diplomat Rear Air Suspension Won't Dump Fully - Troubleshooting Guide
Plumbing Medium 1-2 hours 169 👍

Monaco Diplomat Rear Air Suspension Won't Dump Fully - Troubleshooting Guide

Last week my 2006 Monaco Diplomat's rear air bags started refusing to dump all the way down when I hit the air dump before leveling. The front dumps fine, but the back stays partially inflated.

I'm still pretty new to RV maintenance and not sure where to start troubleshooting this. Should I be hearing air escaping when I activate the dump? What are the most common causes when rear air bags won't dump completely? Any guidance on what to check would be really appreciated! …more
How to Replace RV Slide Topper Fabric: Complete DIY Guide 2024
Exterior Medium 2-3 hours 161 👍 1

How to Replace RV Slide Topper Fabric: Complete DIY Guide 2024

I pulled into three different campsites this month and my torn slide topper is eating through my gear faster than I can replace it. I've never done anything like this before and I'm worried I might damage the whole mechanism or make things worse.

Can I actually replace just the fabric portion safely, or should I bite the bullet and have the entire assembly replaced by a professional? I'm also concerned about costs - I'm hoping this won't break the bank. If it is something I can do myself, how difficult is it really? I don't want to get in over my head and end up with a bigger problem than I started with.

Can you help me understand the best approach for my specific situation? …more
RV Infotainment System Update Guide: Step-by-Step Safety Instructions
General Medium 30-60 min 148 👍 1

RV Infotainment System Update Guide: Step-by-Step Safety Instructions

Three weeks ago my 2023 Aspire's infotainment system occasionally wouldn't recognize the update USB, but now it just blinks endlessly without doing anything. Has anyone experienced this specific issue with this RV model's system? I want to understand what might be preventing the update from proceeding. …more
RV Black Tank Not Holding Full Capacity: 7 Common Causes and DIY Repair Solutions
Plumbing Medium 2-3 hours 127 👍

RV Black Tank Not Holding Full Capacity: 7 Common Causes and DIY Repair Solutions

Somewhere between embarrassed and desperate, I have to ask this probably dumb question: why does my RV's black tank act full when it should hold way more? We have a 40-gallon black tank, but when I try to fill it with water for cleaning, it starts overflowing through the vent pipe at only 23 gallons. I'm afraid there might be something seriously wrong with the installation or that I could damage the system.

A professional cleaning service said the tank was completely clean with no blockages, so I'm confused about why it won't hold its full capacity. The water is definitely coming out the vent pipe, so I assume that means the vent isn't blocked? I'm hesitant to keep trying things without understanding what's actually causing this - could this be a safety issue or sign of improper installation? What should I be looking for to diagnose this safely? …more
How to Fix RV Garage Door Delamination: Complete Repair Guide 2024
Exterior Hard 2-4 hours 126 👍

How to Fix RV Garage Door Delamination: Complete Repair Guide 2024

Finally facing the inevitable with my 1994 Fleetwood Jamboree Rallye garage doors that are 30 years old and completely delaminating at the seams — repair or replace? The extruded aluminum frame corners that are supposed to be screwed together are failing because the screws keep breaking under stress. What started as minor separation has now progressed to the point where the structural integrity of the entire door system is compromised.

I've noticed that not only are the corner joints failing, but the door panels themselves seem to be separating from their backing material, and the weather seals around the perimeter are starting to pull away as well. The doors don't close properly anymore, leaving gaps that let in water and debris. I'm concerned about further damage to the garage area and contents if I don't address this comprehensively.

I need a complete repair approach that addresses the delamination issue, reinforces the structural components, and replaces the failing seals. Simply adding corner braces feels like a band-aid solution, and I'm worried about drilling out the broken screws without causing more damage to the aluminum frame. What's the proper way to tackle this type of comprehensive garage door repair on an older RV? …more

Still stuck on this repair?

Get a personalized answer from a verified RV mechanic. Describe your issue and get step-by-step help.

Chat with an RV Mechanic
27708 RV owners helped · Avg response under 5 min
How to Replace Obsolete F53 Chassis ABS Control Module - Ford Discontinued Repairs Guide
Engine Hard 4-6 hours 119 👍

How to Replace Obsolete F53 Chassis ABS Control Module - Ford Discontinued Repairs Guide

Last week my 2013 Coachman Encounter's F53 chassis started throwing ABS codes — can't afford the $3,000+ dealer quote so is there a DIY fix under $500? Our ABS control module failed, creating a no brakes issue. After being towed to a Ford Dealership on May 28th, the repair has been incredibly complex. They've received incorrect and damaged modules, and even after claiming to fix it, the ABS warning light remains on and reprogramming attempts have failed.

Ford apparently no longer makes this module for units over 10 years old. What alternatives exist for finding a compatible ABS control module for my older F53 chassis when OEM replacement isn't available? …more
How to Reduce RV Interior Noise: Complete Sound Dampening Guide for Motorhomes
General Medium 4-8 hours 116 👍

How to Reduce RV Interior Noise: Complete Sound Dampening Guide for Motorhomes

Despite having a 2021 Coachmen Mirada, looking at my sound meter right now and there's 69 decibels of highway noise blasting through the cabin. My target is to achieve approximately 65 decibels for better communication with passengers.

I need a systematic approach to interior noise reduction. What are the most effective sound dampening materials and techniques for motorhomes? Specifically, I'm looking for solutions that address engine noise transmission, road noise, and any rattling components that contribute to the overall sound level.

What realistic noise reduction can I expect from proper sound deadening implementation, and what are the key areas to focus on for maximum impact? …more
Ford F53 V8 Engine Tapping Noise: Complete TSB 25-2200 Repair Guide for RV Owners
Engine Hard Professional repair required 112 👍

Ford F53 V8 Engine Tapping Noise: Complete TSB 25-2200 Repair Guide for RV Owners

Since I replaced the valve cover gaskets on my 2022 motorhome's Ford F53 V8 yesterday, I'm still hearing that annoying tapping noise — did I miss something? I've been noticing this tapping or ticking sound when the engine is idling, and sometimes it seems to run a bit rough. I'm worried I might have a serious problem.

I found a Ford Technical Service Bulletin (TSB 25-2200, NHTSA ID 11018524) that might be related to my issue. The bulletin mentions potential camshaft and valve tappet wear causing ticking noises, rough performance, and diagnostic trouble codes P0301-P0308. According to the bulletin, repairs might even include a new long block.

Can someone help me understand what this TSB covers exactly? Does it apply to my specific year model, and what kind of repairs might be needed? I'm hoping this might be something covered under warranty since the RV is still pretty new to me.

Any guidance would be really appreciated - I'm still learning about all this mechanical stuff! …more
Ford F53 Motorhome Key Programming Guide: Security Features & Programming Tips
Engine Medium 2-4 hours (including dealer visit) 112 👍

Ford F53 Motorhome Key Programming Guide: Security Features & Programming Tips

Apparently my 2008 Ford F53 motorhome is 16 years old and starting to have key programming issues — should I attempt DIY programming or call a locksmith? I just dropped $176 on two new transponder keys for my 2024 Windsport 34R (2022 F53 chassis) because I only had one set and didn't want to get locked out in the middle of nowhere wearing my pajamas and fuzzy slippers (again).

The Ford dealer quoted me another $140-170 to program these fancy chip keys, insisting I'd need to haul my 35-foot house-on-wheels down there for the programming. But the parts guy said "try them first" - and wouldn't you know it, both keys fired right up without any programming!

So what's the deal here? Are these unprogrammed transponder keys going to mysteriously stop working next Tuesday? Did I just dodge a bullet, or am I missing out on some important anti-theft features that actually matter? I'm feeling pretty smug about saving that programming fee, but also slightly paranoid that my motorhome might strand me at the worst possible moment! …more
RV Water Heater Not Hot Enough: Fix Lukewarm Water Issues
Appliances Medium 2-4 hours 112 👍

RV Water Heater Not Hot Enough: Fix Lukewarm Water Issues

Looked forward to our two-week cross-country trip starting tomorrow until I discovered my RV water heater that used to produce scalding hot water now barely gets lukewarm. Both the electric and gas functions appear to be working - I can hear the gas igniting and see the electric indicator light - but the water temperature just won't get hot enough for a decent shower.

I've been dealing with this for weeks now and it's driving me crazy. The water gets warm, but nowhere near the hot temperatures I used to get. Is this a common problem with RV water heaters? What are the most likely culprits when you're getting lukewarm water instead of hot? I really need to figure out what's causing this and how to fix it before my next camping trip. …more
5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide
Engine Easy 15 minutes 105 👍

5 Star Tuner X4 for Ford V10 RV: Complete Performance & Upgrade Guide

Planning to tune my 2018 Ford 6.8L V10 RV but got quoted $800 for professional tuning and wondering if the 5 Star X4 is DIY-friendly. Specifically want to know about real-world performance improvements - does it actually improve throttle response and shift points? What about fuel economy gains?

Which of the 3 programs works best for RV towing? Is the investment worth it for better drivability or just hype? …more
How to Replace Atwood Levelegs Control System with GAMA Electronics RF340-4PR Controller
Slideouts Medium 4-6 hours 104 👍

How to Replace Atwood Levelegs Control System with GAMA Electronics RF340-4PR Controller

Noticed my Tiffin Allegro Bay's Atwood Levelegs control pad has a completely blank display, won't respond to any commands, AND all the leveling jacks are totally dead. I'm looking at expensive repair options - around $400 for repair service or $3000+ for a complete Bigfoot replacement system.

I researched alternatives and found the GAMA Electronics RF340-4PR-ASL controller with HP4PR-ASL handheld pendant, which cost around $235 shipped. I customized the solution by 3D printing a switch panel with 4 DPST on/off switches and a momentary DPDT switch for jack control.

Is this type of aftermarket replacement reliable and compatible with existing Atwood jacks and wiring? I want something I can easily troubleshoot and maintain. …more

Need a second opinion?

Not sure if this applies to your rig? An RV technician can confirm the fix for your specific make and model.

Ask an RV Expert
27708 RV owners helped · Avg response under 5 min
Fix RV Low Water Pressure on City Connection: Troubleshooting Pump Assembly
Plumbing Easy 30 minutes 103 👍

Fix RV Low Water Pressure on City Connection: Troubleshooting Pump Assembly

Last week my pressure regulator started reading a solid 40 PSI on city water but my water pump keeps cycling on for 5-6 seconds when everything says it should stay completely off. When I connect to city water, my water pressure regulator shows a solid 40 PSI, which should be plenty, right? But here's the weird part - my water pump keeps kicking on for about 5-6 seconds then shuts off, even though I'm connected to city water and the pump switch is supposed to be off.

The really frustrating thing is that the pressure feels weak throughout the RV, with specifically the bathroom sink and kitchen sink seeming low, though the shower has good pressure. I've already changed out the intake/check valve and don't currently have a filter in the system. I can see the pump running while on city water, which I know is not normal. I noticed the kitchen and bathroom sink screens were plugged - which might explain some pressure issues - but now I'm wondering about the toilet's low pressure. Could there be a screen in the toilet line I'm not seeing?

I've been full-timing for two years and never had this issue before. What should I be checking for? I'm handy enough to do basic repairs but need to know where to focus my troubleshooting efforts. …more
Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point
Engine Medium 2-3 hours 101 👍

Ford E450 Inertia Switch Location Guide - Find Your RV's Fuel Cutoff Reset Point

Every Ford E450 I've worked on had the inertia switch behind the driver's panel — but my 2011 Freedom Elite 32r has it hidden somewhere completely different. The engine is experiencing what appears to be fuel delivery issues after a minor fender bender, and I suspect the inertia switch may have been triggered and needs to be reset.

I've already done extensive searching in the typical locations - removed both driver and passenger side kick panels completely, pulled out the glove box, and even partially disassembled sections of the dashboard. Despite checking all these common spots where Ford usually places these switches, I'm coming up empty-handed.

Could the switch be integrated into another component on this particular year and model? Are there any alternative locations specific to the E450 chassis or Freedom Elite configuration that I should be checking? I'm also wondering if some models of this year might not have a traditional standalone inertia switch at all. …more
Robert, RV Mechanic
Ask an RV Mechanic Avg reply < 5 min

My Rig Settings

Hi, I'm Hank!
Need help setting up? I can walk you through it
Rig Info
Give it a name you'll recognize
Power & Electrical
Climate Control
Water System
Refrigerator Type
Leveling System
Convenience & Features
Sync across devices