Results for "pressure"

Engine Medium varies 1,624 👍 1

Newmar Motorhome Rough Ride Fix: Suspension & Air Pressure

Noticed my 2013 Newmar still rides incredibly rough through every crack and pothole even after replacing all six air bags. The ride height was never adjusted after the air bag replacement, and I'm worried I might be causing more damage or creating a safety hazard.

I upgraded from a Super C expecting a much smoother ride with the air suspension system, but this feels just as jarring. Am I missing something critical with the suspension setup? Could improper air pressure or ride height settings be causing this rough ride, and what other components should I be concerned about? I don't want to make things worse by continuing to drive it if there's a fundamental issue I'm overlooking. …more

Read answer

Engine Easy N/A 999 👍 0

Ford V10 Triton Engine Maintenance Guide: EGR Delete vs Regular Service Tips

Spent years doing regular EGR maintenance on my old gas motorhome without issues — but this 2007 Fleetwood 31' Tioga with Ford V10 Triton has me second-guessing everything. I keep reading conflicting information about EGR delete procedures on V10 engines, and I'm worried I might make things worse if I mess with it.

Is the EGR delete modification actually necessary on this 2007 3-valve V10, or am I overthinking this? I don't want to void any warranties or create problems that weren't there before. Would I be better off just sticking to regular maintenance instead of modifications? I'm looking for reassurance that I'm taking the right approach to keep this engine running reliably for years to come. …more

Read answer

Engine Hard Not recommended 803 👍 0

Ford V10 Turbo Kit for Motorhomes: Cost, Risks & Better Alternatives

Before every camping season rolls around, I face the same dreaded reality with my Ford V10 motorhome crawling up mountain passes like a wounded turtle. What are the realistic costs involved? Are there major risks to the engine I should know about? Is this actually worth doing or should I look at other options? …more

Read answer

Product Ranking 8 compared

Best RV Surge Protectors

4.6 (14,200 reviews)

Engine Medium 2-6 hours 581 👍 1

Onan 5500 Generator Problems: Complete Repair Guide

Spent three hours testing my 2014 Hurricane's Onan 5500 gen getting 11.8 volts output when every manual says it should be 12+ volts! Here's the weird part - when I disconnect the remote harness, the generator fires right up and purrs like a kitten. But the second I plug that remote connection back in, boom - both the remote start light AND the generator start light come on, and then... nothing. Won't start at all.

The really bizarre symptom is this chattering from the fuel pump when the remote is connected. I can literally feel the fuel line jumping around when I put my hand on it. It's like the pump is having some kind of seizure or something!

I'm guessing this has to be some kind of electrical issue between the control board and the remote system, but I've never seen anything quite like this before. Anyone dealt with this specific combo of symptoms on an Onan 5500? Really hoping there's a known fix because pulling this thing out of the RV again would be a major pain! …more

Read answer

Engine Medium 1 hour research 474 👍 0

Fleetwood Excursion Tire Upgrade Guide: 255 to 275 Width Conversion

After upgrading my 2015 Fleetwood Excursion M-35B from 255 to 275 width tires, it started getting sketchy handling on highway turns. The current 255/70R22.5 tires are wearing out and I'd love to go wider with 275/70R22.5 for better stability, but I keep getting conflicting advice from different tire shops.

Some say it's fine, others warn about clearance issues and potential problems. I really need to know what specific measurements I should check before making this change. What wheel width do I need? How do I verify there's enough steering clearance? I don't want to buy expensive tires only to find out they don't fit properly or aren't safe for my RV's load requirements. …more

Read answer

Engine Medium varies 382 👍 1

Michelin RV Tire Problems: Complete Guide & Solutions

Standing in my driveway planning to tackle these serious handling issues with my new Michelin Agilis HD Z 245/70R19.5 tires on my 2018 Winnebago Vista LX 27N this Saturday — what should I check first? The RV now has 25k miles, and since switching from Goodyear tires, I'm experiencing terrible tail wag - especially when towing my 2024 Toyota Tacoma and in windy conditions.

I've tried multiple tire pressures (82 psi from door sticker, 110 psi from installer, up to 100 psi) but nothing resolves the side-to-side movement. I have several stability modifications installed (Rear Trac Bar, Aux Roadmaster Rear Swaybar, Front Roadmaster Swaybar, Koni FSD shocks), which previously helped with handling.

The movement feels like the towed truck is actually pushing the RV's rear side-to-side, making driving extremely uncomfortable. I'm within Michelin's 60-day/2500-mile buy-back period and want to understand why these tires are performing so differently from my previous set.

Could experienced RV owners help me diagnose what might be causing these handling problems? …more

Read answer

Plumbing Medium 1-2 hours 366 👍 0

Monaco Diplomat Rear Air Suspension Won't Dump Fully - Troubleshooting Guide

Last week my 2006 Monaco Diplomat's rear air bags started refusing to dump all the way down when I hit the air dump before leveling. The front dumps fine, but the back stays partially inflated.

I'm still pretty new to RV maintenance and not sure where to start troubleshooting this. Should I be hearing air escaping when I activate the dump? What are the most common causes when rear air bags won't dump completely? Any guidance on what to check would be really appreciated! …more

Read answer

Exterior Hard 4-8 hours 354 👍 0

How to Repair RV Roof Soft Spots: Fix Water-Damaged Wood Step-by-Step Guide

My RV roof has had this squishy soft spot right next to the roof vent ever since we got hammered by that nasty rainstorm last month. When I step on that area, it feels spongy and I can tell there's water damage underneath the rubber membrane.

I'm pretty sure water has been leaking through the vent area and rotting the plywood underneath, which seems to be about a hand-sized area. I want to cut the rubber membrane back, replace the damaged wood, and then reseal it properly.

Should I be worried about the structural integrity? What type of materials should I use for the replacement wood, and how do I properly reseal everything to prevent this from happening again? I'm thinking of folding back the rubber, replacing the damaged section of wood, and then resealing the membrane over the new wood. …more

Read answer

Engine Easy N/A 348 👍 0

Ford E-350 vs E-450 RV Chassis: Fuel, Power & Weight

Last weekend I felt this awful engine strain and heard sluggish acceleration sounds while test-driving a 2017 Phoenix Cruiser #2351 with its E-350 chassis and V10 engine. I'll be doing extensive western touring through mountain and plains regions, which means substantial mountain grades and wind challenges. I'm comfortable driving slowly and want to understand two key things: 1) Will this E-350 chassis handle mountain grades without major issues, and 2) What's the real-world fuel consumption like? I plan to do an initial inspection this weekend, followed by a third-party mechanical review. I'm not overly concerned about fuel economy but want to understand the actual performance limitations. I'd appreciate insights from owners who have experience with similar touring conditions on an E-350 chassis. …more

Read answer

Exterior Medium 3-4 days (includes curing time) 347 👍 1

DIY RV Basement Door Paint Repair: Complete Guide & Cost Analysis

Despite protecting my RV all winter, those brutal summer months have absolutely destroyed the paint on my four basement doors and rear wheel area across 2' x 20', leaving me staring at a $5,000-6,500 shop estimate versus DIY with my compressor. I've never done automotive paint work before. Could I really achieve decent results for under $500 like I keep reading online? I'm concerned about proper paint matching, whether I'll damage the surface during prep, and if I choose the wrong spray gun or technique.

Has anyone successfully tackled RV exterior panel paint repair as a DIY project? I need reassurance that this is actually doable without professional training, and guidance on the complete process from start to finish. …more

Read answer

Slideouts Medium 2-4 hours 320 👍 2

Power Gear Leveler Won't Retract: Complete Repair Guide

Called Power Gear support and they said press retract after leveling, but my system deployed perfectly and now just sits there doing absolutely nothing. The system appears to receive the retract command since I can hear some activity, but the legs remain extended. The only way to get them up is by engaging the transmission which triggers the emergency retract function.

I need a systematic approach to diagnose this retraction failure. What are the most likely causes when Power Gear levelers deploy normally but won't respond to the retract command, and what's the proper troubleshooting sequence to identify whether it's a solenoid valve issue, wiring problem, or control module failure? …more

Read answer

Product Ranking 8 compared

Best RV Refrigerators

4.3 (9,200 reviews)

Engine Medium 1-2 hours for installation 305 👍 0

Sailun TerraMax HLT-C Tire Review: Are They Right for Your Class C Motorhome?

Since I'm planning to swap out my RV tires this Saturday — need to confirm these Sailun TerraMax HLT-C 225/75R16C E/10PLY tires are compatible with my Class C motorhome. I've been looking at the Sailun TerraMax HLT-C 225/75R16C E/10PLY tires since they seem like a good value, but I'm not sure if they're appropriate for a motorhome versus a trailer.

I know load ratings are important, but I'm honestly not entirely sure how to figure out if these tires would work safely on my rig. Should I be looking at my door placard or getting the actual weight measured? Any guidance would be really helpful since I don't want to make a costly mistake with something as important as tires. …more

Read answer

Propane Hard 6-8 hours 286 👍 0

Atwood GC10A-4E Replacement: Best Tankless RV Heaters

Halfway through draining my Atwood GC10A-4E's supposed 10-gallon capacity, the water's already running cold but my gauge shows I've only pulled maybe 6 gallons. Are there any dual-fuel tankless units that would work as a replacement? I know there's no plug-and-play option, but what are the best tankless water heaters that offer both gas and electric operation for RVs? …more

Read answer

Engine Medium 2-4 hours diagnosis 269 👍 0

RV Engine Stalling & Transmission Issues - Diagnosis Help

Replaced multiple parts but I'm still standing in the auto parts store aisle staring at diagnostic tools with no clue which one I actually need for my RV's stalling and transmission issues. When I'm cruising and let off the gas, sometimes the RPMs drop like a rock, other times they just hang there until I slow down more. That's weird enough, but here's the real kicker - every now and then the whole engine just dies on me when I'm rolling up to a stop sign or red light. Maybe happens twice in 600 miles or so, so it's not constant but definitely not normal either.

I'm wondering if these two issues are connected somehow? Like could whatever's causing the stalling also be messing with how the transmission acts when I let off the throttle? Really hoping someone has seen this combo before because I'm in Germany and finding RV-specific help is tough.

I'm looking for any insights from folks who might know what could cause this - hoping to get to the bottom of this before it becomes a bigger problem! …more

Read answer

Engine Hard 2-3 hours for diagnosis 242 👍 0

1999 F53 V10 Oil in Coolant: Complete Head Gasket Diagnosis & Repair Guide

Called three dealerships about oil contamination in my 1999 Ford F53 V10's coolant system — before I tackle this head gasket nightmare myself. The unit overheated after the oil level dropped significantly, though it still starts and runs without throwing any codes.

Based on the symptoms, I suspect a blown head gasket, but I want to perform proper diagnostic testing before committing to a major repair. What specific diagnostic procedures should I run to confirm whether this is actually a head gasket failure versus other potential causes like a cracked head or block issue?

Looking for a systematic approach to pinpoint the exact problem before I start tearing into this engine. …more

Read answer

Loading more Q&A...

You've seen all 343 Q&A articles!