When Power Gear levelers won't retract but deploy normally, the issue is typically a faulty retract solenoid valve, damaged wiring, or control module failure. This comprehensive guide provides step-by-step troubleshooting to identify and fix the problem.
Keep your RV slide-outs working reliably with this comprehensive maintenance and repair guide.
Levelegs and air suspension are separate systems. If coach wont raise, check that levelers are fully retracted, air compressor is running, and no air leaks. May need professional service if stuck low. Do not drive with suspension issues.
When HWH 325 levelers turn off immediately after pressing extend buttons, it's typically caused by low voltage under load, loose connections, or a faulty control module. Check battery voltage under load and inspect all connections first.
HWH levelers needing battery reset to work indicates low voltage, loose connections, or controller memory issues. Check battery voltage under load (need 12.4V+), clean and tighten all connections, and verify grounds. Call HWH support if issue persists.
HWH control panel issues often stem from corroded connections or worn switches. Clean connectors first, then consider membrane switch replacement before buying a new $400-800 panel.
For Vermont Lippert service, try mobile RV technicians, marine shops, or call Lippert directly for nearest authorized service. Before service call, try manual override and check fuses/connections. Lippert tech support can often diagnose remotely with error codes.