Results for "box awning"

Before buying our first RV, I never even knew slide topper awnings existed, and now ours is acting up and I'm completely lost. We're having all three slide toppers professionally replaced next week, but I'm honestly worried we'll end up with the same problems all over again if they're not installed properly.

I've been reading horror stories about misaligned toppers, wrong spring tension, and fabric bunching up during slide operation. Since this is costing us a pretty penny, I really need to know what specific things I should insist the installer check and test before they leave. What are the critical adjustments that need to be made during installation to prevent these common topper problems from happening again? …more

Already dealing with my 2019 Forest River's 4-year-old dryer constantly tripping the breaker — should I repair it or just replace with something more 30-amp friendly? We have a 2024 Tiffin Open Road and I'm not sure if I can use the dryer when we're plugged into a 30 amp hookup at campgrounds.

I've heard mixed things about whether dryers work on 30 amp service or if you need 50 amp. Some people say it depends on the dryer type? I'm honestly not even sure how to tell what voltage our dryer is or what that means for power requirements. Any guidance would be really appreciated! …more

Between the wind gusts hitting camp right now, I can see my box awning doing this wild flapping dance that's making me nervous. The Carefree HD Awning Stabilizer appears to be designed specifically for this application, but I need technical assessment of its actual performance characteristics.

Primary concerns are bounce reduction effectiveness, compatibility across different box awning manufacturers, and installation complexity for self-service repair. Wind stability is the critical performance metric - current setup shows significant sway at wind speeds above 10-15 mph.

Looking for factual analysis of this stabilizer's capabilities on box awning configurations, particularly regarding installation requirements and real-world wind resistance improvements. …more

About two weeks into living in my 2023 Forest River Forester MBS2401B and this slide out I've never dealt with before is leaking water from the bottom. The leak occurs specifically when the slide is in the retracted position during wind-driven rain events. Water is penetrating at floor level beneath the dinette area of the full wall slide assembly.

I have verified that all visible seals appear to be properly seated and the topper awning shows no obvious damage. Given that this is occurring on a current model year unit, I need to understand if this represents a manufacturing defect covered under warranty, and what specific component is likely causing the failure at the bottom of the slide mechanism. …more

Spent the weekend camping only to have that piercing beep from my Girard GG1000 awning motion sensor going off constantly in the wind. I have a 2025 Tiffin Wayfarer with a Girard GG1000 awning and I'm trying to install support poles and a sunshade, but this darn motion sensor keeps retracting the awning every time I get near it or try to attach anything.

I've looked through the manual twice and can't find any clear instructions on how to temporarily disable the motion sensor. I know there has to be a way to turn it off so I can actually use my awning accessories without it constantly thinking something's wrong and pulling itself back in.

Does anyone know the exact steps to disable the motion sensor on the GG1000? I just need it off long enough to get my support poles and sunshade attached, then I'd like to turn it back on for normal operation. …more