How to Replace RV Residential Refrigerator Mounting Brackets: Step-by-

The Quick Answer

Since you have a broken GE residential refrigerator mounting bracket and can't find it through Google searches, your best bet is to contact GE Appliances directly at 1-800-432-2737 with your model number, or check with local appliance repair shops who often stock these specialty brackets. You can also fabricate a replacement using angle brackets from hardware stores, as residential fridge mounting hardware in RVs often uses standard metal brackets that can be replicated. The original GE part will likely cost $25-50, while a fabricated solution using heavy-duty angle brackets will run about $10-15.

What's Causing This

Residential refrigerator mounting brackets in RVs fail primarily due to road vibration and the constant stress of travel. Unlike RV-specific fridges designed for mobile use, residential units weren't built to handle the continuous movement, causing metal fatigue in the mounting hardware. The bracket you're showing appears to be a corner support bracket that helps secure the refrigerator to the cabinet framework.

GE residential fridges in RVs typically use a combination of mounting brackets - some attach to the sides of the cabinet, others to the top or bottom. When one breaks, it puts additional stress on the remaining brackets, so it's crucial to replace it quickly. The bracket design varies by GE model year and refrigerator size, which is why generic searches aren't yielding results.

These brackets also fail because RV manufacturers sometimes modify standard residential mounting systems, creating hybrid solutions that aren't readily available through normal appliance parts channels. Your bracket might be an RV manufacturer's custom piece designed to work with the GE unit.

Tools You'll Need

For finding and installing a replacement bracket, you'll need basic tools and some detective work supplies:

• Flashlight or headlamp for inspecting the refrigerator area
• Camera or phone to document the installation before removal
• Screwdriver set (Phillips and flathead)
• Socket wrench set with extension
• Level to ensure proper refrigerator alignment
• Measuring tape and ruler for dimensions
• Metal cutting tools if fabricating (angle grinder or hacksaw)
• Drill and metal bits if making new mounting holes

Step-by-Step Fix

WARNING: Refrigerators are extremely heavy appliances. Always have adequate assistance when removing or installing mounting brackets. Use proper lifting techniques and support the refrigerator from multiple points to prevent injury or damage.

Start by documenting your refrigerator's model number, which should be on a label inside the fridge or on the back. Call GE Appliances customer service at 1-800-432-2737 with this information - they can often locate brackets even for older models. If that fails, contact your RV manufacturer's parts department, as they might have the specific bracket or know the part number.

Take detailed photos of the broken bracket and any intact mounting points before removing anything. Measure the bracket dimensions, hole spacing, and thickness. Remove the broken pieces carefully, noting how they attached to both the refrigerator and cabinet structure. This information will be crucial whether you're ordering an original part or fabricating a replacement.

If you can't source an original part, visit local appliance repair shops - many keep common brackets in stock or can order them through commercial channels not available to consumers. Alternatively, take your measurements and photos to a metal fabrication shop or well-equipped hardware store. Heavy-duty angle brackets, L-brackets, or flat steel stock can often be modified to create a functional replacement. Ensure any fabricated bracket meets the correct load capacity requirements for your specific refrigerator model (verify weight specifications with dealer) - residential refrigerators typically weigh 250-350 pounds, with larger models up to 400+ pounds and replacement brackets must handle both static weight and dynamic road forces.

Before beginning any work, ensure the refrigerator is properly supported with adequate help - this is critical for safety. During installation, maintain this support before removing any remaining brackets. Have multiple helpers hold the unit while you work, and double-check that all mounting points are secure before releasing support. Test the door operation and ensure the refrigerator sits level after the repair is complete.

When to Call a Pro

Call a professional if the bracket failure has caused damage to the refrigerator cabinet or if multiple mounting points have failed simultaneously. This often indicates a more serious structural issue that requires expert assessment. Additionally, if your refrigerator is tilting significantly or the doors won't close properly, the mounting system may need complete redesign.

Consider professional help if you're uncomfortable with the fabrication process or if the bracket is in a location that requires removing built-in cabinetry or other RV components. Some mounting brackets are integrated into the RV's structural framework, and modifying these incorrectly can affect your RV's integrity.

Also consult a pro if your RV is still under warranty, as improper repairs might void coverage. RV service centers have experience with residential fridge installations and often stock common replacement parts. They can also assess whether your mounting system meets current safety standards and recommend upgrades if necessary.