Ford 7.3 Godzilla Fumoto Oil Drain Valve Installation: Complete RV Maintenance Guide & Pro Tips

Tools & Parts Needed

Find these on Amazon: Fumoto F106N Oil Drain Valve , Oil Drain Pan 6 Quart , Torque Wrench Set

What's Going On

Let's talk about what's going on here. The Fumoto F106N drain valve is the correct part number for Ford 7.3 Godzilla engines in Class A RVs. This valve features M14-1.25 thread pitch and includes a safety clip. Installation is straightforward but requires proper torque specifications and safety precautions when working under your RV.

What's Going Wrong

There are several reasons this might be happening, and understanding them helps you fix it right the first time.

Getting Ready

Before diving in, gather these items:

• Fumoto F106N drain valve
• Socket wrench set
• Torque wrench
• Oil drain pan (6+ quart capacity)
• Jack and jack stands or RV leveling blocks
• Safety glasses
• Nitrile gloves
• Clean rags
• Thread sealant (optional - valve includes washer)

Walking Through the Fix

Here's how to tackle this:

1. Warm the engine - Run engine for 3-5 minutes to warm oil for easier draining, but don't let it get too hot to work safely
2. Secure the RV - Park on level ground, engage parking brake, and use wheel chocks. If additional clearance is needed, use proper jack stands
3. Locate the drain plug - The oil pan is at the rear of the engine. You may need to remove the engine cover inside the RV for better access
4. Position drain pan - Place a large drain pan under the oil drain plug, accounting for oil flow direction
5. Remove original drain plug - Using appropriate socket, carefully remove the factory drain plug. Oil will flow immediately
6. Clean drain hole - Once oil stops flowing, clean the drain hole threads with a rag to remove debris
7. Replace oil filter - Remove and replace the oil filter following standard procedures
8. Install Fumoto valve - Thread the F106N valve by hand first, ensuring proper alignment. The valve includes a crush washer
9. Torque to specification - Tighten to 20 ft-lbs using a torque wrench. Do not overtighten as this can damage the oil pan threads
10. Test operation - Ensure the valve opens and closes smoothly and the safety clip engages properly
11. Add fresh oil - Refill with appropriate oil quantity (typically 8.0 quarts for 7.3 Godzilla with filter)
12. Check for leaks - Run engine and inspect valve area for any leaks

Red Flags That Need a Pro

Contact a qualified RV technician if:

• You're uncomfortable working under the RV safely
• The original drain plug is stripped or cross-threaded
• Oil pan threads are damaged
• You don't have proper jack stands or safety equipment
• The valve leaks after installation

Professional installation typically costs $50-100 but ensures proper torque and safety.